Operating Guide
Table Of Contents
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Printer
- Scanner
- Copier
- Telephone
- Fax
- Sending Faxes
- Receiving Faxes
- 7.5 Selecting the way to use your fax machine
- 7.6 Receiving a fax automatically – Auto answer ON
- 7.7 Receiving a fax manually – Auto answer OFF
- 7.8 Using the unit with an answering machine
- 7.9 Receive polling (retrieving a fax placed on another fax machine)
- 7.10 Junk fax prohibitor (preventing fax reception from undesired callers)
- 7.11 Receiving a fax into your computer
- Caller ID
- Programmable Features
- Useful Information
- Help
- Paper Jams
- Cleaning
- General Information
- Index
2. Preparation
21
2.2 Dialling mode
If you cannot dial (page 44), change this setting
according to your telephone line service.
1 {MENU} i {#}{1}{2}{0}
DIALLING MODE
=TONE [V^]
2 Press {1} or {2} to select the desired setting.
{1} “PULSE”: For rotary/pulse dial service.
{2} “TONE” (default): For tone dial service.
3 {SET}
4 Press {MENU} to exit.
2.3 Selecting the operation mode
(Fax/Copy/Scan)
You can select the desired mode by pressing one of the
following buttons.
– {FAX}: Select this mode when using the unit as a fax
machine (page 44).
– {COPY}: Select this mode when using the unit as a
copier (page 37).
– {SCAN}: Select this mode when using the unit as a
scanner for the computer (page 34).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 59) and the timer before returning to
the default operation mode (feature #464 on page
59).
{MENU}
{SET}
FLB883FX-PFQX2770ZA-OI-en.book Page 21 Wednesday, September 26, 2007 10:41 AM