Operating instructions

15
Setup
Recording paper!
1
Pinch the right side of the recording paper
guides, then slide it open to its full width.
2
Fan the stack of paper to prevent a paper
jam.
3
Insert the paper into the recording paper
entrance.
●
The paper should not be over the tab.
●
If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Stack of
paper
Correct
Incorrect
Tab
Tab
Adding paper
1. Remove all of the installed paper.
2. Add paper to the stack of paper you removed and
straighten.
3. Follow steps 1 to 4 above.
A4, letter or legal size recording paper can be used for fax messages. The unit can hold up to 150
sheets of 60 g/m
2
to 75 g/m
2
paper or 120 sheets of 90 g/m
2
paper.
See the note for paper specifications on page 74.
●
The unit is set for A4 size paper by default. If you want to use letter or legal size paper, change
the setting (feature #16 on page 55).
4
Adjust the width of the guides to the size of
the recording paper by sliding the right side
of the guides.
Pinch the upper
part of the
recording
paper guide.
Right side of the
recording paper guides
Recording
paper
entrance
Side to be printed
face down.