Operating instructions
35
Sending Faxes
Sending the same document to pre-programmed parties
1
Insert the document FACE DOWN.
●
If necessary, press u
repeatedly to select the desired setting
(p. 30).
2
Press the desired a (1–2) or
HI.
●
You can also use g. Display the
desired key name, and press i.
Example:
●
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling each
number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
.
<BROADCAST1>
FACE DOWN
RESOLUTION
STOP
FAX START
SET
BROADCAST
MANUAL BROAD
EASY DIAL
Note:
●
If you select the “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
transmit will decrease.
●
If the document exceeds the memory capacity (p. 73),
sending will be cancelled.
●
If one of the entries is busy or does not answer, it will
be skipped. All skipped entries will be redialled up to 5
times after all of the other entries have been called.
To cancel the broadcast setting
1. Press { while the unit displays the following.
Display:
●
The display will show the following.
/
2. Press w.
YES:SET/NO:STOP
SEND CANCELLED?
BROADCASTING