Operating instructions

1. Introduction and Installation
17
1.7 Paper tray and paper
tray cover
1 Insert the paper tray (1) into the slot (2) on
the back of the unit.
2 Pull the tension plate forward (1) and attach
the paper tray cover (2), then push the
tension plate back (3).
Note:
L Do not place the unit in an area where the
paper tray may be obstructed (i.e., by a wall,
etc.).
L Keep this surface (4) away from walls etc.
more than 50 mm to let the unit cool down.
To remove the paper tray
Pull the paper tray forward in the direction of the
arrow.
When you use legal paper, do not attach the
paper tray cover.
2
1
1
2
4
3
FLM651E-PFQX2346ZB-en.book Page 17 Tuesday, November 22, 2005 3:26 PM