Operating Instructions KXFP141/145E

3. Telephone
23
Caller ID
3.5 Caller ID service
This unit is compatible with the Caller ID
service offered by your local telephone
company. To use this feature, you must
subscribe to a Caller ID service.
Important:
L This unit is designed in accordance with
the “FSK based subscriber line protocol”
under the ETS (European
Telecommunication Standard) and only
supports the basic CLIP (Calling Line
Identification Presentation) features.
L This unit will only display the caller’s
telephone number and name.
L This unit will not support future additional
telephone services.
L This unit cannot support services based
on the “DTMF based subscriber line
protocol”.
L Depending on the service of the local
telephone company, the date/time of the
call or the caller’s name may not be
displayed.
Change the following ring settings to 2 or
more rings beforehand.
– For KX-FP141: FAX ring setting (feature #06
on page 46)
– For KX-FP145: TAD ring setting (feature #06
on page 46) and FAX ring setting (feature #06
on page 46)
3.5.1 How Caller ID is displayed
The calling party’s telephone number or name
will be displayed after the first ring. You then
have the option of whether or not to answer the
call.
The unit will automatically store caller
information (name, telephone number and the
time of the call) of the 30 most recent calls. Caller
information is sorted by the most recent to the
oldest call. When the 31st call is received, the
first call is deleted. Caller information can be
viewed on the display one item at a time (page
24). You can print the Caller ID list (page 65).
Note:
L If the unit is connected to a PBX (Private
Branch Exchange) system, you may not
receive the caller information. Consult your
PBX supplier.
L If the unit cannot receive caller information,
the following will be displayed:
“OUT OF AREA”: The caller dialled from an
area which does not provide Caller ID
service.
“PRIVATE CALLER”: The caller requested
not to send caller information.
To confirm caller information using the
Caller ID list
The unit will store information for the most recent
30 callers.
– To print manually, see page 65.
– To print automatically after every 30 new
calls, activate feature #26 (page 47).
FP141-145E.book Page 23 Wednesday, August 20, 2003 11:00 AM