Operating Instructions KXFP141/145E

6. Answering Device (KX-FP145 only)
44
4 Press {SET}.
5 Speak clearly about 20 cm away from the
microphone.
L The display will show the remaining
recording time.
6 When finished recording, press {STOP}.
L The unit will repeat your message.
7 Press {MENU}.
To check the transfer greeting message
1. Press {MENU}, {#}{6}{1}.
2. Press {A} or {B} repeatedly to select
“CHECK”.
3. Press {SET}.
L The unit will play the message.
4. Press {MENU}.
To erase your transfer greeting message
1. Press {MENU}, {#}{6}{1}.
2. Press {A} or {B} repeatedly to select
“ERASE”.
3. Press {SET}.
4. Press {MENU}.
Note:
L When transferring a call, the pre-recorded
transfer greeting message will be played.
L If the voice guidance feature is set to OFF
(feature #47 on page 48) and you have
erased your own transfer greeting message,
the message transfer feature will be
cancelled.
Pager call
This feature allows your unit to call your pager
when your unit receives an incoming voice
message.
1. Press {MENU}.
2. Press {#}, then {7}{0}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your pager number and/or pauses (up
to 46 digits).
Example:
1 202 555 1234PP12345678
– 1 202 555 1234: Your pager number
– PP: Pauses
– 12345678: Your pager access code, if
required.
6. Press {SET}.
L The unit will dial the stored number.
7. Check that your pager received the pager
test call.
8. Press {DIGITAL SP-PHONE}.
FP141-145E.book Page 44 Wednesday, August 20, 2003 11:00 AM