Operating Instructions KXFP141/145E

7. Programmable Features
50
Note:
L If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
Code #77 (KX-FP145 only): Changing the
receiving mode in the auto answer setting
AUTO ANSWER
=TAD/FAX [±]
“TAD/FAX” (default): Telephone Answering
Device/Facsimile mode (page 32)
“FAX ONLY”: Facsimile only mode (page 32)
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
Note:
L ECM selection (feature #68, page 49) will not
be reset.
7.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 46 to
page 50.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
7.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 18 for details).
{#}{0}{2} Your logo
L Enter your logo using the dial keypad (see
page 19 for details).
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 20 for details).
{#}{0}{4} Sending report
– {1}: “ON”
– {2}: “OFF”
– {3}: “ERROR” (default)
{#}{0}{6} FAX ring count
– {1}: “1”
– {2}: “2” (default)
– {3}: “3”
– {4}: “4”
– {5}: “5”
– {6}: “6”
– {7}: “7”
– {8}: “8”
– {9}: “9”
{#}{0}{6} TAD ring count (KX-FP145 only)
– {1}: “1”
– {2}: “2” (default)
– {3}: “3”
FP141-145E.book Page 50 Wednesday, August 20, 2003 11:00 AM