FP215-PNQX1896ZA-OI-en.PDF Page 1 Tuesday, December 23, 2008 11:09 AM Operating Instructions Compact Plain Paper Fax with Digital Answering System Model No. KX-FP215 For hearing or speech impaired TTY users, TTY: 1-877-833-8855 For support: (for customers in the U.S.A. or Puerto Rico) — VISIT www.panasonic.com/help — E-MAIL www.panasonic.com/contactinfo — PHONE CALL 1-800-211-PANA (7262) Please read these operating instructions before using the unit and save for future reference.
FP215-PNQX1896ZA-OI-en.book Page 2 Tuesday, December 23, 2008 11:09 AM Thank you for purchasing a Panasonic fax machine. Things you should keep a record of Attach your sales receipt here. For your future reference Date of purchase Serial number (found on the rear of the unit) Dealer’s name and address Dealer’s telephone number Caution: L This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www.dtsc.ca.
FP215-PNQX1896ZA-OI-en.book Page 3 Tuesday, December 23, 2008 11:09 AM Copyright: L This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © Panasonic Communications Co., Ltd.
FP215-PNQX1896ZA-OI-en.book Page 4 Tuesday, December 23, 2008 11:09 AM Important Information Important 1For Safety assistance, Instructions Information please visit http://www.panasonic.com/help Important safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3.
FP215-PNQX1896ZA-OI-en.book Page 5 Tuesday, December 23, 2008 11:09 AM Important Information Routine care L Wipe the outer surface of the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. For assistance, please visit http://www.panasonic.
FP215-PNQX1896ZA-OI-en.book Page 6 Tuesday, December 23, 2008 11:09 AM Table of Contents 1. Introduction and Installation 1. Table of Contents 4.8 Accessories 1.1 1.2 Included accessories..................................... 8 Accessory information ................................... 8 Finding the Controls 1.3 1.4 Button descriptions........................................ 9 Overview ..................................................... 10 5. Distinctive Ring Distinctive Ring 5.1 5.
FP215-PNQX1896ZA-OI-en.book Page 7 Tuesday, December 23, 2008 11:09 AM Table of Contents FCC and Other Information 11.3 FCC and Other Information ......................... 55 Limited Warranty 11.4 Limited Warranty (United States and Puerto Rico) ............................................................ 56 Customer Services 11.5 Customer Services directory ....................... 57 12.Index 12.1 Index...........................................................
FP215-PNQX1896ZA-OI-en.book Page 8 Tuesday, December 23, 2008 11:09 AM 1. Introduction and Installation 1 Introduction 1For Accessories assistance, andplease Installation visit http://www.panasonic.com/help 1.1 Included accessories 1.2 Accessory information 1 Telephone line cord (PFJA02B002Y)*1 2 Handset (PFJXN0341Z)*1 Accessories for this unit can be ordered online, by fax, or by telephone. – Replacement film*1 (Model No./Part No.
FP215-PNQX1896ZA-OI-en.book Page 9 Tuesday, December 23, 2008 11:09 AM 1. Introduction and Installation P {SET} Finding the Controls 1.3 Button descriptions A BCDE F G H IJ K L To store a setting during programming. Q {TONE} L To change from pulse to tone temporarily during dialing when your line has rotary pulse service. You can also use tone dial service by changing feature #13 on page 37. R {MUTE} L To mute your voice during a conversation. Press again to resume the conversation.
FP215-PNQX1896ZA-OI-en.book Page 10 Tuesday, December 23, 2008 11:09 AM 1. Introduction and Installation Installation 1.4 Overview 1.5 Ink film 3 The included film roll is a starter ink film. 4 5 6 1 Open the front cover.
FP215-PNQX1896ZA-OI-en.book Page 11 Tuesday, December 23, 2008 11:09 AM 1. Introduction and Installation L Make sure the blue gear (2) and white gear (3) are installed as shown. Correct 1 turn 3 Tight 6 Incorrect 2 No ink film is wrapped around the blue core. 5 Turn the blue gear (4) in the direction of the arrow until the ink film is tight (5) and at least one layer of ink film is wrapped around the blue core (6).
FP215-PNQX1896ZA-OI-en.book Page 12 Tuesday, December 23, 2008 11:09 AM 1. Introduction and Installation To use A4 size paper 1.6 Handset cord Connect the handset cord (1). 1 1.7 Paper tray Pull up the metal recording paper guide (1), then install the paper tray (2). 2 Note: L When you use letter paper, you do not need to install the A4 paper guide. L Change the recording paper size to “A4” (feature #16 on page 37).
FP215-PNQX1896ZA-OI-en.book Page 13 Tuesday, December 23, 2008 11:09 AM 1. Introduction and Installation 1.9 Recording paper The unit can hold up to 20 sheets of 60 g/m2 to 90 g/m2 (16 lb to 24 lb) paper. Please refer to page 54 for more information on recording paper. For superior results, we recommend Hammermill® Jet Print paper. Note: L Remove all of the installed paper before adding paper. 1 Fan the paper to prevent paper jams. 2 Insert the paper gently, print-side down (1).
FP215-PNQX1896ZA-OI-en.book Page 14 Tuesday, December 23, 2008 11:09 AM 2. Preparation provider. Please attach the filter (4) to the telephone line cord of the unit. 2 Preparation 2For Connections assistance, and please Setup visit http://www.panasonic.com/help 2.1 Connections Caution: L When you operate this product, the power outlet should be near the product and easily accessible. 1 Telephone line cord L Connect to a single telephone line jack (RJ11).
FP215-PNQX1896ZA-OI-en.book Page 15 Tuesday, December 23, 2008 11:09 AM 2. Preparation Help Button 2.2 Quick Setup 2.3 Help function You can print out the quick fax setup guide and select the desired receiving mode depending on your situation. {1} “TAM/FAX” (default): Use as a telephone answering machine and/or fax (page 28). {2} “DIST. RING”: With the Distinctive Ring service (page 30). {3} “TEL ONLY”: Mostly phone calls (page 27). {4} “FAX ONLY”: Use only as a fax (page 27).
FP215-PNQX1896ZA-OI-en.book Page 16 Tuesday, December 23, 2008 11:09 AM 2. Preparation Volume Initial Programming 2.4 Adjusting volume 2.5 Date and time {SET} {SET} {MENU} {A}{B} {<}{>} 1 {MENU} i {#}{0}{1} i {SET} Ringer volume While the unit is idle, press {A} or {B}. L If there are any documents in the document entrance, you cannot adjust the volume. Confirm that there are no documents in the entrance. To turn the ringer OFF Press {B} repeatedly to display “RINGER OFF= OK?”.
FP215-PNQX1896ZA-OI-en.book Page 17 Tuesday, December 23, 2008 11:09 AM 2. Preparation 2.6 Your logo To enter your logo Example: “BILL” You can program your logo (name, company name, etc.) so that it appears on the top of each page sent. 1. Press {2} 5 times. {SET} 2. Press {4} 6 times. {MUTE} LOGO=| B LOGO=B| I 3. Press {5} 6 times. LOGO=BI| L {MENU} 4. Press {>} to move the cursor to the next space and press {5} 6 times.
FP215-PNQX1896ZA-OI-en.book Page 18 Tuesday, December 23, 2008 11:09 AM 2. Preparation 2.7 Your fax number You can program your fax number so that it appears on the top of each page sent. {SET} {MENU} {FLASH} {STOP} {<}{>} 1 {MENU} i {#}{0}{3} i {SET} NO.=| 2 Enter your fax number, up to 20 digits. L L L L To enter a “+”, press {*}. To enter a space, press {#}. To enter a hyphen, press {FLASH}. To erase a number, press {STOP}. 3 {SET} 4 Press {MENU} to exit.
FP215-PNQX1896ZA-OI-en.book Page 19 Tuesday, December 23, 2008 11:09 AM 3. Telephone 3 Telephone Automatic Dialing 3.1 Storing names and telephone numbers into the phonebook The unit provides a phonebook (50 items). {SET} L If you do not need to edit the name, skip to step 5. 4 Edit the name. For further details, see the storing procedure on page 19. 5 {SET} L If you do not need to edit the telephone number, skip to step 7. 6 Edit the telephone number.
FP215-PNQX1896ZA-OI-en.book Page 20 Tuesday, December 23, 2008 11:09 AM 3. Telephone Caller ID 3.5.2 Making a call using a one touch dial key 1 Press and hold the desired one touch dial key ({1} to {9}). L You can view other one touch dial assignments by pressing {A} or {B}. 2 Press {SP-PHONE} or lift the handset. 3.5.3 Erasing a one touch dial assignment 1 Press and hold the desired one touch dial key ({1} to {9}). i {MENU} L To cancel erasing, press {STOP}. 3.
FP215-PNQX1896ZA-OI-en.book Page 21 Tuesday, December 23, 2008 11:09 AM 3. Telephone 3.7 Viewing and calling back The display will show the number of new calls in standby mode. Example: 10 MISSED CALLS 10:59AM 00 {CALLER ID} To edit a telephone number before calling back/storing While displaying a desired caller information, press {*} repeatedly.
FP215-PNQX1896ZA-OI-en.book Page 22 Tuesday, December 23, 2008 11:09 AM 3. Telephone 3.9.2 Erasing specific caller information 1 {CALLER ID} 2 Press {A} or {B} repeatedly to display the desired item. i {<} i {SET} i {STOP} 3.10 Storing caller information into the phonebook 1 {CALLER ID} 2 Press {A} or {B} repeatedly to display the desired item. L If the number requires editing, see page 21.
FP215-PNQX1896ZA-OI-en.book Page 23 Tuesday, December 23, 2008 11:09 AM 4. Fax 4 Fax Sending Faxes 4.1 Sending a fax manually 1 To send more than 10 pages at a time Insert the first 10 pages of the document. Add the other pages (up to 10 at a time) on top of the previously inserted pages while the last page is being fed into the unit. Pre-dialing a fax number 1. Enter the fax number. 2. Insert the document. 3.
FP215-PNQX1896ZA-OI-en.book Page 24 Tuesday, December 23, 2008 11:09 AM 4. Fax 4.2 Document requirements 128 mm (5") Minimum document size L Check that ink, paste or correction fluid has dried completely. L To send a document with a width of less than 210 mm (81/4"), we recommend using a copy machine to copy the original document onto A4 or letter-sized paper, then sending the copied document. 4.
FP215-PNQX1896ZA-OI-en.book Page 25 Tuesday, December 23, 2008 11:09 AM 4. Fax 4.4 Broadcast transmission By storing the phonebook items (page 19) into the broadcast memory, you can send the same document to multiple parties (up to 20). Your programmed items will remain in the broadcast memory, allowing frequent reuse. Note: L If you select “FINE”, “SUPER FINE” or “PHOTO” resolution, the number of pages that the unit can send will decrease.
FP215-PNQX1896ZA-OI-en.book Page 26 Tuesday, December 23, 2008 11:09 AM 4. Fax Receiving Faxes 4.5 Selecting the way to use your fax machine Depending on your situation, select the way you prefer to use your fax machine. – Use as a telephone answering machine and/or fax (TAM/FAX mode) – Use only as a fax (FAX ONLY mode) – Use mostly as a telephone (TEL mode) Note: L See page 15 for quick setup. If a fax calling tone is detected, the fax machine will receive the fax automatically. 4.5.
FP215-PNQX1896ZA-OI-en.book Page 27 Tuesday, December 23, 2008 11:09 AM 4. Fax 4.6 Receiving a fax manually – Auto answer OFF Note: L By default, the unit reduces the size of the received document to 92 % when printing (See feature #36 on page 39 for details). 4.6.1 Activating TEL mode Set the fax machine to TEL mode by pressing {AUTO ANSWER} repeatedly to display “TEL MODE”. L The {AUTO ANSWER} indicator turns OFF. L When the unit has new messages, {AUTO ANSWER} indicator will flash.
FP215-PNQX1896ZA-OI-en.book Page 28 Tuesday, December 23, 2008 11:09 AM 4. Fax L The {AUTO ANSWER} indicator turns ON. How faxes are received When receiving calls, the unit will automatically answer all calls and only receive fax documents. Note: L The number of rings before a call is answered in FAX ONLY mode can be changed (feature #06 on page 37). 4.7.2 Activating TAM/FAX mode (Telephone Answering Machine/Fax mode) 1 Make sure feature #77 is set to “TAM/FAX” (page 41) beforehand.
FP215-PNQX1896ZA-OI-en.book Page 29 Tuesday, December 23, 2008 11:09 AM 4. Fax 2. Press {>} repeatedly to display “JUNK LIST DISP.”. i {SET} 3. Press {A} or {B} repeatedly to display the desired item. i {<} L To cancel erasing, press {STOP}, then press {MENU}. 4.
FP215-PNQX1896ZA-OI-en.book Page 30 Tuesday, December 23, 2008 11:09 AM 5. Distinctive Ring Example: Using three phone numbers 5 Distinctive Distinctive Ring Ring 5.1 Distinctive Ring service When a call is made to one of your phone numbers, the telephone company sends a ring pattern to your telephone line to indicate which number the call is intended for. By setting up this unit for Distinctive Ring, you can make the fax machine automatically start fax reception when a call comes to the fax number.
FP215-PNQX1896ZA-OI-en.book Page 31 Tuesday, December 23, 2008 11:09 AM 6. Copy L If the document exceeds the memory capacity, copying of the exceeded document will be canceled and this feature will be turned OFF automatically. 6 Copy Copying 6.1 Making a copy To stop copying 1 Press {STOP}. 6.1.1 More copying features To enlarge a document 1. Insert the document. 2. {COPY} i {>} 3. Press {A} repeatedly to select “150%” or “200%”.
FP215-PNQX1896ZA-OI-en.book Page 32 Tuesday, December 23, 2008 11:09 AM 6. Copy 3. Enter the number of copies (up to 20). 4. Press {>} 2 times to display “COLLATE OFF”. 5. Press {A} or {B} repeatedly to display “COLLATE ON”. i {START} Example: Making 2 copies of a 4-page original document 4 3 1 2 1 1 2 2 3 4 3 3 4 2 1 Collated pages 4 Uncollated pages Note: L The unit will store the documents into memory while collating the copies.
FP215-PNQX1896ZA-OI-en.book Page 33 Tuesday, December 23, 2008 11:09 AM 7. Answering Machine 7 Answering Machine Greeting 7.1 Recording your greeting message The unit has a pre-recorded greeting message for TAM/FAX mode. If you record your own greeting message, it will be played instead of the pre-recorded greeting message when a call is received. The maximum recording time of your greeting message is either 16 seconds (default) or 60 seconds.
FP215-PNQX1896ZA-OI-en.book Page 34 Tuesday, December 23, 2008 11:09 AM 7. Answering Machine Incoming Messages 7.2 Listening to recorded messages When the unit has recorded new voice messages: – The {AUTO ANSWER} indicator will flash when auto answer is turned ON. – The total number of recorded messages will flash on the display. 7.2.1 To play back messages Voice time/day stamp During playback, the unit will announce the day of the week and time that each message was recorded.
FP215-PNQX1896ZA-OI-en.book Page 35 Tuesday, December 23, 2008 11:09 AM 7. Answering Machine Remote Operation Key Remote command {1} Repeats a message (during playback)*1 Important: L Program the remote operation ID beforehand (feature #11 on page 37). L Set the unit to TAM/FAX mode before going out (page 28). L Use a touch tone telephone for remote operations.
FP215-PNQX1896ZA-OI-en.book Page 36 Tuesday, December 23, 2008 11:09 AM 8. Programmable Features 8 Programmable Features Summary Features 8.1 Programming {MENU} {SET} 1 {MENU} 2 Press {#} and the 2-digit code. 3 Press the desired command to display the desired setting. L This step may be slightly different depending on the feature. 4 {SET} 5 To exit programming, press {MENU}.
FP215-PNQX1896ZA-OI-en.book Page 37 Tuesday, December 23, 2008 11:09 AM 8. Programmable Features 8.2 Basic features Feature Feature code Selection Setting the quick setup {#}{0}{0} {1} “TAM/FAX” (default) {2} “DIST. RING” {3} “TEL ONLY” {4} “FAX ONLY” See page 15 for details. Setting the date and time {#}{0}{1} Enter the date and time using the dial keypad. See page 16 for details. Setting your logo {#}{0}{2} Enter your logo using the dial keypad. See page 17 for details.
FP215-PNQX1896ZA-OI-en.book Page 38 Tuesday, December 23, 2008 11:09 AM 8. Programmable Features 8.3 Advanced features Feature Feature code Selection Setting the journal report to print automatically {#}{2}{2} {0} “OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax transmissions and receptions. {1} “ON” (default): The unit will print a journal report automatically after every 30 new fax transmissions and receptions (page 23).
FP215-PNQX1896ZA-OI-en.book Page 39 Tuesday, December 23, 2008 11:09 AM 8. Programmable Features Feature Feature code Selection Setting the time adjustment {#}{3}{3} Using this feature, the unit’s date and time setting will be automatically adjusted when caller information is received. {0} “MANUAL”: Deactivates this features. {1} “AUTO” (default): The date and time setting will be automatically adjusted.
FP215-PNQX1896ZA-OI-en.book Page 40 Tuesday, December 23, 2008 11:09 AM 8. Programmable Features Feature Feature code Selection Changing the fax activation code {#}{4}{1} If you wish to use an extension telephone (page 27) to receive faxes, activate this feature and program the activation code. {0} “OFF” {1} “ON” (default) 1. {MENU} i {#}{4}{1} 2. Press {1} to select “ON”. i {SET} 3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}. L The default code is “;#9”. 4.
FP215-PNQX1896ZA-OI-en.book Page 41 Tuesday, December 23, 2008 11:09 AM 8. Programmable Features Feature Feature code Selection Setting flash time {#}{7}{2} The flash time depends on your telephone exchange or host PBX. {1} “700ms” (default) {2} “600ms” {3} “400ms” {4} “300ms” {5} “250ms” {6} “110ms” {7} “100ms” {8} “90ms” Note: L If the unit is connected via a PBX, this setting may need to be changed in order for PBX functions (transferring a call, etc.) to work correctly.
FP215-PNQX1896ZA-OI-en.book Page 42 Tuesday, December 23, 2008 11:09 AM 9. Help 9 Help 9.1 Error messages – Reports If a problem occurs during fax transmission or reception, one of the following messages will be printed on the confirmation and journal reports (page 23). Message Code COMMUNICATION ERROR 40-42 46-72 FF Cause & Solution L A transmission or reception error occurred. Try again or check with the other party. 43 44 L A line problem occurred.
FP215-PNQX1896ZA-OI-en.book Page 43 Tuesday, December 23, 2008 11:09 AM 9. Help 9.2 Error messages – Display If the unit detects a problem, one or more of the following messages will appear on the display. Display Cause & Solution “BACK COVER OPEN” L The back cover is open. Close the back cover firmly. “CALL SERVICE” L There is something wrong with the unit. Contact our service personnel. “CHECK DOCUMENT” L The document was not fed into the unit properly. Re-insert the document.
FP215-PNQX1896ZA-OI-en.book Page 44 Tuesday, December 23, 2008 11:09 AM 9. Help Display Cause & Solution “MODEM ERROR” L There is something wrong with the unit’s modem. Contact our service personnel. “NO FAX REPLY” L The other party’s fax machine is busy or has run out of recording paper. Try again. “OPEN CABINET CHECK FILM SLACK” “OPEN CABINET CHECK FILM TYPE” L Please use genuine Panasonic replacement film (page 8). L The ink film is slack. Tighten it (see step 5 on page 11).
FP215-PNQX1896ZA-OI-en.book Page 45 Tuesday, December 23, 2008 11:09 AM 9. Help 9.3.2 General Problem Cause & Solution The unit displays “PAPER JAMMED” even though paper is installed. L You forced the recording paper into the paper tray too strongly. Remove all of the installed paper, and re-install it gently. The unit displays “CHECK PAPER” even though paper is inserted. L The paper is inserted halfway. Insert it correctly (page 50) and press {SET} to clear the message.
FP215-PNQX1896ZA-OI-en.book Page 46 Tuesday, December 23, 2008 11:09 AM 9. Help 9.3.3 Fax – sending Problem Cause & Solution I cannot send documents. L The other party’s fax machine is busy or has run out of recording paper. Try again. L The other party’s machine is not a fax machine. Check with the other party. L The other party’s fax machine failed to answer the fax automatically. Send the fax manually (page 23).
FP215-PNQX1896ZA-OI-en.book Page 47 Tuesday, December 23, 2008 11:09 AM 9. Help Problem Cause & Solution A blank sheet is ejected. L If a blank sheet is ejected after the received document is printed out, the size of the document sent by the other party is as large as, or larger than, the recording paper, and the receiving reduction rate is not programmed correctly. Program the proper rate in feature #36 (page 39). L The other party placed the document in their fax machine facing the wrong way.
FP215-PNQX1896ZA-OI-en.book Page 48 Tuesday, December 23, 2008 11:09 AM 9. Help Problem Cause & Solution A black line, white line or smudge appears on the copied document. L The scanner glass or rollers are dirty with correction fluid, etc. Clean them (page 51). Please do not insert a document before correction fluid has dried completely. The copied image is distorted. L Adjust the width of the document guides to fit the actual size of the document. The printing quality is poor.
FP215-PNQX1896ZA-OI-en.book Page 49 Tuesday, December 23, 2008 11:09 AM 10. Maintenance 3 Turn the blue gear (5) in the direction of the arrow 10 Maintenance Jams until the ink film is tight (6) and at least one layer of ink film is wrapped around the blue core (7). 10.1 Recording paper jams 10.1.1 When the recording paper has jammed in the unit The display will show the following.
FP215-PNQX1896ZA-OI-en.book Page 50 Tuesday, December 23, 2008 11:09 AM 10. Maintenance 4 Close the back cover securely by pushing down on the dotted area at both ends (8), then close the front cover securely (9). 8 10.2 Document jams 1 Open the front cover. Remove the jammed document carefully (1). 1 9 5 Install the paper tray (page 12), then insert the recording paper gently (page 13). 10.1.2 When the recording paper was not fed into the unit properly The display will show the following.
FP215-PNQX1896ZA-OI-en.book Page 51 Tuesday, December 23, 2008 11:09 AM 10. Maintenance Cleaning 10.3 Document feeder/recording paper feeder/scanner glass cleaning Clean the document feeder/recording paper feeder/scanner glass when: – Documents or recording paper frequently misfeed. – Smudges or black/white lines appear on the original document when sending or copying. Important: L Remove the recording paper, then remove the paper tray beforehand, otherwise the paper may misfeed or jam.
FP215-PNQX1896ZA-OI-en.book Page 52 Tuesday, December 23, 2008 11:09 AM 10. Maintenance 4 Clean the thermal head (5) with a cloth moistened 10.4 Thermal head cleaning If smudges or black/white lines appear on a copied/received document, check whether there is dust on the thermal head. Clean the thermal head to remove the dust. Important: L Remove the recording paper, then remove the paper tray beforehand, otherwise the paper may misfeed or jam. with isopropyl rubbing alcohol, and let it dry thoroughly.
FP215-PNQX1896ZA-OI-en.book Page 53 Tuesday, December 23, 2008 11:09 AM 11. General Information 11 General Printed Repor Information ts Specifications 11.1 Reference lists and reports 11.2 Specifications You can print out the following lists and reports for your reference: – “SETUP LIST” – “PHONEBOOK LIST” – “JOURNAL REPORT” – “PRINTER TEST” L If the test print has a smudges, blurred points or lines, clean the thermal head (page 52).
FP215-PNQX1896ZA-OI-en.book Page 54 Tuesday, December 23, 2008 11:09 AM 11. General Information ■ Fax memory capacity*3: Transmission: Approx. 25 pages Reception: Approx. 28 pages (Based on the ITU-T No. 1 Test Chart in standard resolution, without using the Error Correction Mode.) *1 Transmission speed depends on the contents of the pages, resolution, telephone line conditions and capability of the other party’s machine. *2 Transmission speed is based on the ITU-T No. 1 Test Chart with original mode.
FP215-PNQX1896ZA-OI-en.book Page 55 Tuesday, December 23, 2008 11:09 AM 11. General Information FCC and Other Information 11.3 FCC and Other Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FP215-PNQX1896ZA-OI-en.book Page 56 Tuesday, December 23, 2008 11:09 AM 11. General Information Limited Warranty 11.
FP215-PNQX1896ZA-OI-en.book Page 57 Tuesday, December 23, 2008 11:09 AM 11. General Information Customer Services 11.5 Customer Services directory Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or E-mail us via: http://www.panasonic.
FP215-PNQX1896ZA-OI-en.book Page 58 Tuesday, December 23, 2008 11:09 AM 12. Index Copy: 31 Collation: 31 Enlarge/Reduce: 31 12. Index 12.
FP215-PNQX1896ZA-OI-en.book Page 59 Tuesday, December 23, 2008 11:09 AM 12.
FP215-PNQX1896ZA-OI-en.book Page 60 Tuesday, December 23, 2008 11:09 AM Panasonic OFFICE ADVANTAGE PROGRAM Free peace of mind, direct from Panasonic NO EXTRA COST ■ ■ Covered during the period of limited warranty 1: parts, labor, and toll-free help line 2 Free replacement 3 and repair program The Panasonic Office Advantage Consumer Service Program. Panasonic knows that if your unit is not up and running, neither is your business. That’s why we created the Panasonic Office Advantage Program.
