Operating Instructions

9. Programmable Features
49
Code #41: Changing the fax activation code
FAX ACTIVATION
If you wish to use an extension telephone to
receive faxes, activate this feature and program
the activation code.
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {SET}.
4. Press {A} or {B} repeatedly to select “ON”.
5. Press {SET}.
6. Enter your code (2–4 digits) using the dial
keys 0–9, {*} and {#}.
L The default code is “@#9”.
L Do not enter “0000”.
7. Press {SET}.
8. Press {MENU}.
Code #42 (KX-FT907 only): Setting the
message alert
MESSAGE ALERT
To alert you when new voice messages are
recorded. The unit beeps slowly until you listen
to the recorded messages.
“ON”: You will be alerted to new messages by a
beeping sound.
“OFF” (default): Deactivates this feature.
Code #43 (KX-FT907 only): Setting the
recording time alert
REC. TIME ALERT
To alert you when there is less than 60 seconds
of remaining recording time. The slow beeps will
continue until you erase the recorded messages
(page 42) or print out the documents in memory.
“ON”: You will be alerted that you have reached
the recording time limit by a beeping sound.
“OFF” (default): Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
“ON” (default): You do not have to press
{FAX/START} for fax reception.
“OFF”: You have to press {FAX/START} for fax
reception.
Code #47 (KX-FT907 only): Setting the voice
guidance
VOICE GUIDANCE
If you wish to hear voice guidance, activate this
feature.
“ON” (default): You will hear the friendly reception
voice guide, pre-recorded messages and voice
time/day stamp.
“OFF”: Deactivates this feature.
Code #49: Setting the auto disconnection
AUTO DISCONNECT
To answer a call with an extension telephone in
TEL/FAX mode (page 36), activate this feature
and program the code.
1. Press {MENU}.
2. Press {#}, then {4}{9}.
3. Press {SET}.
4. Press {A} or {B} repeatedly to select “ON”.
5. Press {SET}.
6. Enter your code (2–4 digits) using the dial
keys 0–9 and {*}.
L The default code is “@0”.
7. Press {SET}.
8. Press {MENU}.
Code #54 (KX-FT907 only): Changing the
recording time for your TAD/FAX greeting
message
GREETING TIME
“16s” (default): Maximum recording time is 16
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 40 for details.
Code #58: Setting the original mode
ORIGINAL
To send or copy a document with faint or dark
writing, set this feature before transmission or
copying.
“NORMAL” (default): Used for normal writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
Code #59: Setting the print contrast
PRINT CONTRAST
To adjust the darkness of received or copied
documents.
“NORMAL” (default): Normal contrast.
FT-901-903-907BX.book Page 49 Monday, March 29, 2004 10:03 AM