System Setup Guide Home Network System HUB Model No. KX-HNB600E Thank you for purchasing a Panasonic product. This document explains how to configure the hub and access it using a mobile device. These steps must be followed before you can use the system. For details about how to use the system, refer to the User’s Guide (page 18). Please read this document before using the unit and save it for future reference. For dedicated help, support, or advice, available to help you Monday - Friday, 09:00 - 23:00.
Table of Contents Introduction Accessory information ..................................3 Expanding the Panasonic Home Network System .........................................................4 General information ......................................6 Important Information About this system .........................................7 For your safety .............................................7 Important safety instructions ........................8 Security cautions .......................................
Introduction Accessory information Supplied accessories No. Accessory item/Part number A AC adaptor/PNLV236E0Y 1 B Telephone line cord/PNJA1037Z (for U.K.) 1 C Wall mounting adaptor/PNKL1049Z1 1 A Quantity B C Additional accessories microSD card (not supplied) A commercially-available microSD card must be inserted into the hub in order to record images from cameras. The following types of microSD cards are supported.
Introduction Expanding the Panasonic Home Network System The Panasonic Home Network System is a wireless system that lets you create a powerful network of devices, such as cameras, sensors, and smart plugs, and control them all with an easy-to-use app. Compatible devices are explained below. For information about the Home Network app, refer to the User’s Guide (page 18). The maximum number of devices for each device type is listed below. Digital Cordless Handset (KX-HNH100: 6 max.
Introduction Smart Plug (KX-HNA101: 50 max.*2) R Can be turned on and off using the handset or Home Network app, when triggered by a sensor, or according to a schedule R Built-in overcurrent and overwattage detection for added peace of mind R Power consumption is logged for your reference *1 *2 Optional handsets may be a different colour from that of the handset supplied as part of a pre-configured bundle.
Introduction General information R This equipment is designed for use on the U.K. and Ireland analogue telephone network. R In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: R Panasonic Corporation declares that the radio equipment type (KX-HNB600) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.ptc.panasonic.
Important Information About this system R This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. R The system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed.
Important Information and 2.472 GHz with a peak transmission power of 100 mW. R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install wiring during a lightning storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations.
Important Information stored in the product and remove the microSD card. Use only trusted repair services authorised by Panasonic. R Before disposing of the product, perform a factory data reset to erase any data stored in the product. Remove and erase the microSD card. R If your mobile device will no longer be used with the product, delete your mobile device’s registration from the product and delete the corresponding app from your mobile device.
Important Information R Do not use benzine, thinner, or any abrasive powder. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. Protecting your recordings R Do not remove the microSD card or disconnect the hub’s AC adaptor while reading or writing data to the microSD card. Data on the card could become corrupted.
Setup Part names and functions A LED indicator You can use the LED indicator to confirm the hub’s status.
Setup Connections *1 4 Insert the AC adaptor plug firmly into the DC jack. Secure the AC adaptor cord by wrapping it around the hook. Connect the AC adaptor to the power outlet. Insert the telephone line cord into the LINE jack and a telephone line jack until you hear a click.*1 DSL/ADSL service users only: Connect your DSL/ADSL filter (not supplied).
Setup Power failure Compatible mobile devices R The hub will not work during a power failure. R The hub’s telephone features will not work during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. iPhone 4 or later, iPad, or iPad mini (iOS 6.0 or later) or an Android™ device (Android 4.
Setup 4 5 6 Change your mobile device’s Wi-Fi setting temporarily so that it connects to the hub directly. R Open your mobile device’s [Settings] app, tap [Wi-Fi], select “KX-HNB600_Panasonic”, enter “00000000” as the password, and then tap [Join]. R If more than 1 item named “KX-HNB600_Panasonic” is displayed, wait approx. 10 minutes and perform this procedure from the beginning. Start the [Home Network] app again.
Setup 3 4 When prompted, press MWi-Fi SETUPN on the hub. R The LED indicator blinks in yellow. R The app temporarily changes your mobile device’s Wi-Fi setting so that it connects to the hub directly. If necessary, enter the password required to connect to your wireless router and then tap [Next]. R The hub and your mobile device connect to your wireless router. 5 When prompted, press MWi-Fi SETUPN on the hub. R Your mobile device will be registered to the hub.
Setup Registering another mobile device In order to access the system from a mobile device, you must first register the mobile device to the hub. You can register up to 8 mobile devices to a hub. Confirm the following before you begin.
Setup Using the app 1 2 3 4 5 Start the [Home Network] app. From the [Home Network] app home screen, tap [Settings]. Tap [Device Registration]. Tap [Registration]. Select the type of device that you want to register. 6 Handset: Place the handset on the charger. Devices other than handset: Press and hold the registration button on the device you want to register until the device’s LED indicator blinks slowly in green. R When registration is complete, the hub sounds one long beep.
Appendix Wireless communication range (DECT) The wireless communication range of each device in the system from the hub is approximately 50 m indoors and approximately 300 m outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other system devices.
Appendix 2 Wall mounting You can use the included wall mounting adaptor to wall mount the hub if desired. Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. R Drive the screws (not supplied) into the wall. 1 Slide the wall mounting adaptor up until it clicks into place. R Make sure the “UP” mark on the wall mounting adaptor faces upwards. R Align and insert the tabs (1) of the wall mounting adaptor to the grooves (2) of the hub.
Appendix 3 Mount the hub on a wall then slide down to secure in place. R Pass the AC adaptor cord and the telephone line cord through the groove (1) in the wall mounting adaptor. Wrap up the telephone line cord as shown to prevent the cord from being pinched. 2 Screws 3 83 mm 4 To telephone line jack Removing the wall mounting adaptor While pushing the release levers (A) away from the centre of the wall mounting adaptor, slide the adaptor down (B). A A 1 2 3 4 20 B Helpline Tel. No.: U.K.
Appendix Specifications R Standards DECT: DECT (Digital Enhanced Cordless Telecommunications) GAP (Generic Access Profile) Wi-Fi: IEEE 802.11b/g/n R Frequency range DECT: 1.88 GHz – 1.90 GHz Wi-Fi: 2.412 GHz – 2.472 GHz (channels 1 – 13) R RF transmission power DECT: Approx. 83 mW (average power per channel: when 4 cameras, a handset, and another device are registered) 250 mW (max.) Wi-Fi: 100 mW (max.
Appendix Conditions of guarantee This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the product proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective product (or any part or parts there of) repaired or replaced free of charge. 1. The product shall have been purchased and used solely within either the U.K.
Appendix Graphical symbols for use on equipment and their descriptions Symbol Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.) “ON” (power) Protective earth “OFF” (power) Protective bonding earth Stand-by (power) Functional earth “ON”/“OFF” (power; push-push) For indoor use only Caution, risk of electric shock Helpline Tel. No.: U.K.
IMPORTANT! If your product is not working properly. . . A Make sure the AC adaptor is connected. B Use the Home Network app to access the User’s Guide and refer to the Troubleshooting section. If you still have any problems, please call the Helpline 0330 3331112 (U.K.) 01 4475228 (Ireland) or contact us through our website: www.panasonic.co.