Operating instructions

Indicator blinking quickly
Indicator blinking very quickly
Indicator blinking slowly in two colors
Indicator blinking in two colors
Hub LED indicator
Off
No power, or LED indicator is turned off
*1
Green Normal operation, connected to wireless router
Registration mode
Hub is searching for wireless router
Green and yellow Hub is starting up
Red Alarm system is armed
Alarm system was triggered
Yellow Initial setup required
Initial setup in progress, mobile device connected
Initial setup is starting
*1 You can configure the hub so that its LED indicator does not light in most states. See “General
settings”, Page 98.
Camera LED indicator
Off
No power, or LED indicator is turned off
*1
Green Normal operation
Registration mode
Red
Motion detected
*2
Live images are being viewed or recorded
Camera is out of range of the hub, or device malfunction
Orange Camera is not registered to a hub
*1 You can configure the camera so that its LED indicator does not light in most states. See “Setting
device profiles (device names, locations, and other settings)”, Page 92.
*2 The LED indicator does not light when the indoor camera’s temperature sensor is triggered.
40
Using the app