Operating Instructions Home Network System Access Keypad Model No. KX-HNK101 Thank you for purchasing a Panasonic product. This document explains how to operate the access keypad properly. For details about how to use the system, refer to the User’s Guide (page 15). Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Table of Contents Introduction Accessory information ...............3 Important Information About this system ......................4 For your safety ...........................4 Important safety instructions ......5 For best performance ................5 Other information .......................6 Setup Part names and functions ..........7 Touchpanel buttons ...................7 LED indicator .............................8 Setup overview ..........................8 Registering the keypad ..............
Introduction Accessory information Supplied accessories No. Accessory item/Part number A AC adaptor/PNLV226KZ 1 B Mounting bracket*1 1 C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW 2 D Wall anchors/PNHR2264Z 2 *1 Quantity The mounting bracket is attached to the product at the time of shipment. A B *1 C D Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product.
Important Information About this system R This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. R The system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed.
Important Information Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Never put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center.
Important Information R If the reception for a hub location is not satisfactory, move the hub to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product.
Setup Part names and functions Touchpanel buttons These buttons allow you to confirm and change the system’s arm mode. During normal operation, the button that corresponds to the current arm mode is lit by default, and all other buttons are dimmed. When you tap the touchpanel, the arm mode buttons light for 10 seconds. During this time, you can tap an arm mode button to switch to the corresponding arm mode. D A B C F E Button Status None displayed No power, or buttons are turned off*1.
Setup LED indicator You can use the LED indicator to confirm the keypad’s status. Indicator Status Off Normal operation, or no power Red, blinking slowly Keypad is not registered to a hub. Red, blinking Keypad is out of range of the hub. Red, blinking quickly Alarm system was triggered. Green, blinking slowly Registration mode (You pressed and held M N) Setup overview 1 2 3 4 8 Initial setup Make sure you can access the system using your mobile device.
Setup Using the app Usage area cautions When you register the keypad by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 15). Using the keypad in the following areas may cause deformation, malfunction, or operational failure.
Setup Installation To mount the keypad flat against the wall, use the mounting bracket. Note: R Mount the keypad on the stable location where the keypad can be adequately supported when mounting. R Do not mount keypad on a soft material. It may fall down, break, or cause injury. R Do not mount the keypad on a plywood surface that is less than 25.4 mm (1 inch) thick. R The pull-out strength of the installation area must be at least 29.4 N (3 kgf).
Setup 2 Place the mounting bracket against the wall and determine where the mounting bracket will be installed. Mark the screw openings on the wall. R Refer to the information below. The dotted lines indicate where the edges of the keypad will be in relation to the mounting bracket. A C D B 3 C 16 mm (5/8 inches) 59 mm (2 5/16 inches) 19 mm (3/4 inches) Screw openings 60 mm (2 11/32 inches) apart Drill pilot holes where you marked the screw openings in the previous step.
Setup Installing the mounting bracket Installing the mounting bracket on wooden walls Line up the holes on the mounting bracket with the holes in the wall, then insert and tighten each screw. Note: R Use the supplied screws (1). R Place the bracket with the “UP” mark facing upwards. 1 1 Installing the mounting bracket on gypsum board, ALC (autoclaved lightweight cellular concrete), or concrete blocks Use the supplied anchors and screws to mount the mounting bracket to the wall.
Setup 3 Insert the anchor into the hole so that it is flush with the wall surface. 4 Line up the holes on the mounting bracket with the anchors, then insert and tighten each screw. R Use the supplied screws (2). R Place the bracket with the “UP” mark facing upwards. 2 2 Installing the keypad to the mounting bracket Attach the keypad to the bracket. R Insert the grooves on the keypad to the 4 tabs on the bracket, and then push down the keypad. For assistance, please visit http://shop.panasonic.
Setup Connecting the AC adaptor Note: R Use only the supplied Panasonic AC adaptor PNLV226-K. Connect the AC adaptor plug to the keypad until you hear a click (A) and connect the AC adaptor to the power outlet (B). 1 2 Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Appendix Using the keypad Changing the arm mode 1 Tap the touchpanel to light the arm 2 mode buttons. Tap the button of the desired arm mode. R If you tap to disarm the alarm system, enter the disarm PIN (default: “0000”) and then tap MOKN. Note: R We recommend changing the PIN from the default before operating the alarm system. For more information, refer to the User’s Guide (page 15).
Appendix 1 2 iPhone®/iPad® Tap in the app’s home screen. Android™ devices Tap or press your mobile device’s menu button in the app’s home screen. Tap [User’s Guide]. Approx. 120 mm ´ 120 mm ´ 21 mm (4 23/32 inches ´ 4 23/32 inches ´ 27/32 inches) R Mass (weight) Approx. 163 g (0.36 lb) (without the mounting bracket attached) Note: R Microsoft® Windows® Internet Explorer® 8 and earlier versions are not supported. R Android 4.1 or later versions are recommended.
Appendix FCC and other information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to h!p://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Ba!eries, Backup Chargers & more… Customer Services Directory For Product Informa"on, Opera"ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to h!p://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Notes 21 HNK101_(en_es)_0618_ver.041.
Notes 22 HNK101_(en_es)_0618_ver.041.
Notes 23 HNK101_(en_es)_0618_ver.041.
IMPORTANT! If your product is not working properly. . . A Reconnect the AC adaptor to the keypad. B Use the Home Network app to access the User’s Guide and refer to the Troubleshooting section. Visit our Web site: http://shop.panasonic.com/support • FAQ and troubleshooting hints are available. For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.
Manual de instrucciones Sistema de red doméstico Teclado de acceso Modelo n° KX-HNK101 Gracias por adquirir un producto Panasonic. Este documento explica cómo operar el teclado de acceso de forma correcta. Para obtener detalles sobre cómo usar el sistema, consulte la Guía del usuario (página 11). Lea este documento antes de usar la unidad, y guárdelo para consultarlo en el futuro. Para obtener ayuda, comuníquese con nosotros llamando al 1-800-272-7033 o visite nuestro sitio web: http://shop.panasonic.
Tabla de Contenido Configuración Nombres de los componentes y funciones .........................................3 Botones del panel táctil ...................3 Led indicador ...................................4 Resumen de configuración ..............4 Registro del teclado .........................4 Confirmación del área de uso ..........5 Instalación .......................................6 Apéndice Uso del teclado ..............................11 Acceso a la Guía del usuario .........
Configuración Nombres de los componentes y funciones Botones del panel táctil Estos botones le permiten confirmar y cambiar el sistema actual del modo de armado. Durante un funcionamiento normal, el botón que corresponde al modo de armado en curso está encendido de forma predeterminada y todos los otros botones están atenuados. Cuando toca el panel táctil, los botones del modo de armado se encienden durante 10 segundos.
Configuración Led indicador 4 Puede usar el Led indicador para confirmar el estado del teclado. Indicador Estado Apagado Operación normal o sin alimentación Rojo, parpadeando lentamente El teclado no está registrado en el hub. Rojo, parpadeante El teclado está fuera de alcance del hub. Rojo, parpadeo rápido Se disparó el sistema de alarma.
Configuración Nota: R Para cancelar sin registrar el teclado, oprima M N en el hub y en el teclado nuevamente. R Si el registro falla, el hub emitirá varios pitidos cortos. Uso de la aplicación Cuando registre su teclado con la aplicación [Home Network], puede asignar un nombre a sus dispositivos y agruparlos por ubicación. Para obtener más información, consulte la Guía del usuario (página 11).
Configuración Instalación Para montar el teclado contra la pared, utilice el soporte de montaje. Nota: R Monte el teclado en una ubicación estable donde se pueda sostener correctamente. R No coloque el teclado sobre un material blando. Podría caerse, romperse o provocar lesiones. R No monte el teclado sobre una superficie contrachapada que tenga menos de 25.4 mm (1 pulgada) de grosor. R La resistencia a la tracción del área de instalación debe ser por lo menos de 29.4 N (3 kgf).
Configuración 2 Ubique el soporte de montaje contra la pared y determine la ubicación de instalación del soporte de montaje. Marque los orificios para tornillos en la pared. R Consulte la siguiente información. La línea punteada indica dónde estarán los bordes del teclado en relación con el soporte de montaje.
Configuración Instalación del soporte de montaje Instalación del soporte de montaje en paredes de madera Alinee los orificios del soporte de montaje con los agujeros en la pared y, a continuación, inserte y ajuste cada tornillo. Nota: R Utilice los tornillos incluidos (1). R Coloque el soporte con la marca “UP” hacia arriba.
Configuración 3 Inserte el anclaje en el orificio para que quede nivelado con la superficie de la pared. 4 Alinee los orificios del soporte de montaje con el anclaje y, a continuación, inserte y ajuste cada tornillo. R Utilice los tornillos incluidos (2). R Coloque el soporte con la marca “UP” hacia arriba. 2 2 Instale el teclado al soporte de montaje Instale el teclado al soporte. R Inserte las 4 lengüetas del teclado en las pestañas del soporte y luego ejerza presión hacia abajo sobre el teclado.
Configuración Cómo conectar el adaptador para corriente Nota: R Use solo el adaptador de corriente alterna Panasonic PNLV226-K que se suministra. Conecte el enchufe del adaptador de corriente alterna al teclado hasta escuchar un clic (A) y conecte el adaptador de corriente alterna a la toma de corriente (B).
Apéndice Uso del teclado Modificación del modo de armado 1 Toque el panel táctil para encender los 2 botones del modo de armado. Toque el botón del modo de armado requerido. R Si toca para desactivar el sistema de alarma, ingrese el NIP de desactivación (por defecto: “0000”) y luego toque MOKN. Nota: R Recomendamos cambiar el NIP predeterminado antes de hacer funcionar el sistema de alarma. Para obtener más información, consulte la Guía del usuario (página 11).
Apéndice R También puede acceder a la Guía del usuario mediante la página web a continuación. www.panasonic.net/pcc/support/tel/ homenetwork/manual/ 12 Para obtener ayuda, visite http://shop.panasonic.com/support HNK101_(es_es)_0619_ver.007.