Operating instructions

3 I
nsert the anchor into the hole so that it is flush with the wall surface.
4 Line up the holes on the mounting bracket with the anchors, then insert and
tighten each screw.
R Use the supplied screws (
2
).
R P
lace the bracket with the “UP” mark facing upwards.
2
2
Installing the keypad to the mounting bracket
A
ttach the keypad to the bracket.
R Insert the grooves on the keypad to the 4 tabs on the bracket, and then push
down the keypad.
For a
ssistance, please visit http://shop.panasonic.com/support
13
Setup
HNK101_(en_es)_0618_ver.041.pdf 13 2015/06/18 20:12:06