Installation Guide Home Network System Outdoor Camera Model No. KX-HNC600E Thank you for purchasing a Panasonic product. This document explains how to install the outdoor camera properly. For details about how to use the system, refer to the User’s Guide (page 29). Please read this document before using the unit and save it for future reference. For dedicated help, support, or advice, available to help you Monday - Friday, 09:00 - 23:00. For U.K.
Table of Contents Introduction Accessory information ..................................3 General information ......................................4 Using Panasonic Home Network System .........................................................5 Important Information About this system .........................................7 For your safety .............................................7 Important safety instructions ........................8 For best performance ...................................
Introduction Accessory information Supplied accessories No.
Introduction Trademarks microSDHC is a trademark of SD-3C, LLC. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. R All other trademarks identified herein are the property of their respective owners.
Introduction a Energy related products information (Public) Power consumption in networked standby and guidance are mentioned in the web site above. For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No. Date of purchase (found on the rear of the unit) Name and address of dealer Attach your purchase receipt here. Using Panasonic Home Network System Thank you for purchasing Panasonic Home Network System products.
Introduction Can I point my cameras to my neighbour’s property? You must respect your neighbour’s right to privacy. CCTV should not be directed into someone else’s home or property. If you misuse your CCTV system you could face criminal or civil consequences. Using CCTV to infringe on another person’s privacy on more than one occasion could be considered as harassment which is a serious criminal/civil offence.
Important Information About this system R This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. R The system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed.
Important Information the circuit breaker and contact an authorised service centre. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.88 GHz and 1.90 GHz with a peak transmission power of 250 mW. R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so.
Important Information R Do not place heavy objects on top of the product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as radiators, cookers, etc. It should not be placed in rooms where the temperature is less than -20 °C or greater than 50 °C. Damp basements should also be avoided. R Do not allow the lens cover or the infrared sensor to become scratched or dirty.
Important Information Disposal of Old Equipment (Only for European Union and countries with recycling systems) This symbol on the products, packaging, and/ or accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.
Installation Location Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m indoors and approximately 300 m outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices.
Installation Location Detection range Visual sensor Infrared sensor Can detect motion anywhere in the visible image. Can detect motion only in part of the visible image (shown here in grey) R You can adjust the area detectable by the visual sensor. For more information, refer to the User’s Guide (page 29). R You can adjust the area detectable by the infrared sensor. See “Adjusting the infrared sensor range”, page 25. R Detection does not occur when there are obstacles in front of the infrared sensor.
Installation Location Direction of motion It is easier to detect objects that move sideways in front of the camera, and more difficult to detect objects that move directly toward the front of the camera. A B C D A It is difficult to detect movement directly towards the front of the camera. B It is easy to detect movement sideways in front of the camera.
Installation Location Installation location examples I want to detect visitors approaching the house Refer to the table below for detecting visitors at an entrance or gate without detecting cars in the street. Ideal example Poor example 1 1 Approx. 3 m Visitors pass in front of the camera from side to side, cars in the street are less likely to cause false detections. 14 Cars in the street are more likely to cause false detections. Helpline Tel. No.: U.K.
Installation Location I want to detect people entering the garage Refer to the table below for detecting people entering a garage without detecting cars in the street. Ideal example Poor example Visitors pass in front of the camera from side to side, cars in the street are less likely to cause false detections. R To prevent faces from being obscured by tall vehicles, adjust the installation position and angle of the camera. Cars in the street are more likely to cause false detections. Helpline Tel. No.
Installation Location Do not install in these locations Installing in the following areas may cause deformation, discolouration, malfunction, or operational failure R In direct sunlight or directly under an outdoor light (even if the surroundings are within operational temperature range, parts of the product may become hot) R Areas subject to frequent vibration, shock, or impact R Near fire, heating devices, magnetic fields (such as near magnets), or air conditioners (including outdoor equipment such as un
Installation Location R Areas affected by breezes from fans, air conditioning unit compressors, water heaters, or car exhaust (severe temperature variations may cause false detections) R Areas subject to severe weather, such as strong wind (camera shake can cause false detections) or rain (strong rain may be detected as an object moving in front of the camera) R Areas with reflective objects, such as glass, that can interfere with detection of temperature variation R Areas where brightness changes easily (
Setup Part names and functions H G I A B CD E F J Microphone Sensor range cap (Standard) Infrared sensor LED indicator Lens unit Speaker M N Used when registering the camera to the hub.
Setup Registering the camera This procedure is not required for devices that were included as part of a bundle. Before you can use the camera, it must be registered to the hub. If the camera is not registered to a hub, the camera’s LED indicator blinks slowly in amber. You can register each device by using the registration buttons or the [Home Network] app. Note: R Before registering the camera, make sure the AC adaptors of the hub and camera are connected and each device is powered.
Setup Wall material information Installation Siding Installation precautions R Do not install the camera on a ceiling. R Holes must be made in the wall for cables and wires to pass through. Panasonic takes no responsibility for issues related to opening holes in walls. R Make sure to waterproof the holes you make in the wall. R Make sure you attach the safety wire to prevent the camera from falling. R Do not use an impact driver. (This may lead to damaged screws or over-tightening.
Setup Ideal example Structure supports exterior surface 4 2 Insert the screw and tighten it. 2 2 Camera mounting stand ALC (autoclaved lightweight cellular concrete) 1 1 Siding 2 Structure behind siding Concrete R Do not use the included screws. Use screw anchors (screw ø: 4 mm) designed for concrete walls. R Carefully read the instructions supplied with the anchors. Follow instructions regarding drill bit diameter, hole depth, etc. R Drill a pilot hole.
Setup Installing the camera 1 Attach the safety wire to the camera. R Place the ring of the safety wire (A) over the screw hole. R Place a washer (B) on top of the ring of the safety wire. R Tighten the screw (C) for the safety wire on top of the washer. Note: R Use the following template below when determining the location of the screw holes. 37 mm 37 mm 3 2 2 1 Attach the camera mounting stand to an outdoor wall. R Secure the stand to the wall by tightening 4 screws (A).
Setup 3 Attach the camera to the stand using the stand attachment hole on the rear or bottom of the camera, depending on the direction you want to aim the camera. R Loosen the screw (1). R Insert the tip of the stand (A) into the stand attachment hole (B) on the rear or bottom side. R Secure the camera by tightening the screw (2). Attaching to the hole on the rear side 2 1 1 4 Adjust the camera angle. R Loosen the screw (1) and then adjust the camera to the desired angle.
Setup 5 Attach the safety wire to the wall. R Place the ring of the safety wire (A) on the wall. R Place the washer (B) on top of the ring of the safety wire. R Tighten the screw (C) for the safety wire on top of the washer. 2 1 6 Connect the DC cable to the AC adaptor. R Pull the DC cable indoors, and connect the DC cable plug (A) to the AC adaptor plug (B). R Connect the AC adaptor (C) to the power outlet. 1 Outdoors 2 Indoors 1 3 2 12 3 Note: R Attach the safety wire while it is bent.
Appendix Testing the motion detection range Adjusting the infrared sensor range After you have installed the [Home Network] app on your mobile device, you can use your mobile device to test the performance of the camera’s motion detection features. For details about these operations, refer to the User’s Guide (page 29). If there are objects that you do not want the infrared sensor to detect, you can adjust the detectable area by attaching sensor range caps.
Appendix Situation and cap types Approximate detection range (view when looking from above) *1 20 °C When you want both sides of the camera to be detectable Standard cap (attached to the camera) When you want one side to be undetectable Cap 1 0 °C 3 1 2 15m 26m 34m (Example) Cap 1 (Example) Cap 1 (Example) Cap 1 1 Cap 2 15m 26m 34m (Example) Cap 3 (Example) Cap 3 3 1 2 15m 26m 34m (Example) Cap 4 (Example) Cap 4 (Example) Cap 4 3 1 15m *1 26 3 2 (Example) Cap 3 Cap 3 Wh
Appendix About the attachment angle of the sensor range cap Example 1 When there is an object on the right side of the viewable area that you do not want to be detected (such as trees): Attach one of caps 1-3 as shown in the example (1) according to the area you do not want to be detected. Example 2 When there is an object on the top left of the viewable area that you do not want to be detected (cars in a street, etc.
Appendix Replacing sensor range caps 1 Remove the attached standard cap. 2 Remove the desired sensor range cap from one of the 4 types (A) and attach it to the sensor (B). R When attaching, rotate the tab (1) on the cap toward the top or at a 45-degree angle according to the type of cap or direction, and attach the cap on the camera, shown in the following illustration. 1 1 2 28 Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 HNC600E_(en_en)_1227_ver.102.
Appendix Features available when using the [Home Network] app Accessing the User’s Guide Some of the camera’s features that are available when using the [Home Network] app are listed below. For more information, refer to the User’s Guide (page 29). – Alarm system You can use the app to arm and disarm the alarm system, confirm the current status of the sensor, and view a log of previous events. – Live camera monitoring You can view live images from the camera, even while away from home.
Appendix Specifications R Standards DECT (Digital Enhanced Cordless Telecommunications) R Frequency range 1.88 GHz - 1.90 GHz R RF transmission power Approx. 93 mW (average power per channel) 250 mW (max.) R Power source 100 – 240 V AC, 50/60 Hz R Power consumption Standby: 2.3 W During operation: 3.1 W (when the LED lights are not lit) 4.5 W (when the LED lights are lit) R Operating conditions -20 °C – 50 °C up to 90 % relative humidity (non-condensing) R Transmitting range Approx. 50 m indoors Approx.
Appendix Conditions of guarantee This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the product proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective product (or any part or parts there of) repaired or replaced free of charge. 1. The product shall have been purchased and used solely within either the U.K.
Appendix Graphical symbols for use on equipment and their descriptions Symbol 32 Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.) “ON” (power) Protective earth “OFF” (power) Protective bonding earth Stand-by (power) Functional earth “ON”/“OFF” (power; push-push) For indoor use only Caution, risk of electric shock Helpline Tel. No.: U.K.
Notes 33 HNC600E_(en_en)_1227_ver.102.
Notes 34 HNC600E_(en_en)_1227_ver.102.
Notes 35 HNC600E_(en_en)_1227_ver.102.
IMPORTANT! If your product is not working properly. . . A Reconnect the AC adaptor to the camera. B Use the Home Network app to access the User’s Guide and refer to the Troubleshooting section. If you still have any problems, please call the Helpline 0330 3331112 (U.K.) 01 4475228 (Ireland) or contact us through our website: www.panasonic.co.