Operating Instructions

Device profiles for water leak sensors
1 From the [Home Network] app home screen, tap [Settings] ® [Device Profiles] ® [Water Leak
Sensor].
2 Select the device that you want to change settings for.
R Settings that affect all water leak sensors are available by tapping [Common Settings]. See
“Changing the volume and length of the water leak alert”, Page 65 for more information.
3 Change the settings as desired, and then tap [OK].
– [Location]: This setting determines the location name assigned to the device.
– [Name]: This setting determines the name assigned to the device.
Device profiles for garage door sensors
1 From the [Home Network] app home screen, tap [Settings] ® [Device Profiles] ® [Garage Door
Sensor].
2 Select the device that you want to change settings for.
R For information about receiving notifications when the garage door is left open, see “Receiving
notifications when a garage door is left open”, Page 65.
3 Change the settings as desired, and then tap [OK].
– [Location]: This setting determines the location name assigned to the device.
– [Name]: This setting determines the name assigned to the device.
– [Installation Position]: This setting allows you to select the sensor’s orientation when the door is
closed. In a typical installation, select [Vertical]. If the garage door sensor is parallel to the ground
when the door is closed, select [Horizontal].
Device profiles for keychain remotes
1 From the [Home Network] app home screen, tap [Settings] ® [Device Profiles] ® [Keychain
Remote].
2 Select the device that you want to change settings for.
3 Change the settings as desired, and then tap [OK].
– [Name]: This setting determines the name assigned to the device.
– [Smart Button]: This setting determines the operation assigned to the remote’s "smart" button.
You can use the smart button to turn on a smart plug, or use it as a panic button that triggers the
alarm system.
Device profiles for keypads
1 From the [Home Network] app home screen, tap [Settings] ® [Device Profiles] ® [Keypad].
2 Select the device that you want to change settings for.
3 Change the settings as desired.
– [Location]: This setting determines the location name assigned to the device.
– [Name]: This setting determines the name assigned to the device.
4 Tap [Keypad Settings].
106
Using the app