Operating Instructions

[Set Mobile Device Name] setting

This setting allows you to change the name assigned to your mobile device. This can help you identify

your mobile device when performing certain operations, such as deregistering or making intercom calls

using a cordless handset.

[Connection Status Icon] (Android devices only)

This setting determines whether the app’s connection status icons are displayed in your mobile device’s

status bar.

[Firmware Update] feature

See “Hub firmware”, Page 112.

[Firmware Version] information

Information about the system’s firmware is displayed.

[App Version] information

Information about the [Home Network] app installed on your mobile device is displayed.

The login password is used to access the system while away from home.

1 From the [Home Network] app home screen, tap [Settings].

2 Tap [General].

3 Tap [Change Login Password].

4 Enter the desired password and then tap [OK].

R To display the characters that you have entered, turn on the [Show Password] checkbox.

Note:

R If you forget the login password, access the system while at home and change the password. (The

password is not required to access the system while at home.)

Quick access

You can use this feature to choose the screen that is displayed when you start the app or tap a

notification.

1 From the [Home Network] app home screen, tap [Settings].

2 Tap [General].

3 Tap [Quick Monitoring Access].

4 Select the desired setting and then tap [OK].

– [Auto]: The app’s home screen is displayed. If a sensor was triggered or images from a camera

are being recorded, the corresponding screen is displayed.

– [Quad View]: The camera list is displayed.

– Camera 1–4: Live images from the selected camera are displayed.

111

Using the app