Operating Instructions

If your mobile device is registered to multiple hubs
Tap [Deregistration from Hub], select the desired hub, and then tap ® [OK].
5 Follow the initial setup procedure (see “Initial setup for iPhone, iPad”, Page 29 or “Initial setup for
Android devices”, Page 30 depending on your mobile device).
Storing your security service account number (certain
models only)
*1
You can store your account number in the hub and integrate the hub with your security service.
1 From the [Home Network] app home screen, tap [Settings].
2 Tap [Order Number].
3 Enter your account number and then tap [OK].
Note:
R When you store your account number, settings for the alert by phone call feature ( “Alert by phone
call”, Page 54) are changed automatically, as follows.
– Alert by phone call is automatically enabled for the [Arm: Away] and [Arm: At Home] arm modes.
– Your security service’s call center phone number and service name is saved automatically in
memory location 1. As a result, items previously saved in memory locations 1–4 will be moved to
memory locations 2–5; the item saved in memory location 5 will be deleted.
R If you delete the account number, settings for the alert by phone call feature are changed
automatically, as follows.
– If your security service’s call center phone number is saved in memory location 1, it will be deleted,
and items previously saved in memory locations 2–5 will be moved to memory locations 1–4.
Model information
*1 This feature is available for the following hub model numbers.
– KX-HNB600G
Reducing battery consumption (iPhone, iPad only)
The [App Battery Save] feature can help you conserve your mobile device’s battery power.
1 From the [Home Network] app home screen, tap [Settings].
2 Tap [App Battery Save].
3 Select the desired setting and then tap [OK].
Note:
R Turning this feature off can affect battery performance.
R When this feature is turned on, the app will not receive landline calls when it is in the background.
R When this feature is turned on, your mobile device cannot execute a smart control scenario via
[Trigger when Home Wi-Fi Connects] if the app is not running in the foreground ( “Using [Trigger
when Home Wi-Fi Connects] to trigger smart control scenarios”, Page 60).
Deregistering your mobile device from the hub
1 From the [Home Network] app home screen, open the options menu (see “Displaying the options
menu”, Page 39).
114
Using the app