Operating Instructions

This section describes commonly used system features, the devices required for each example, and
briefly explains the required settings.
While away from home, you can receive a notification on your mobile device if the alarm system is
triggered.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R Any device equipped with a sensor that can trigger the alarm system
Indoor Camera (KX-HNC200, KX-HNC210)
Outdoor Camera (KX-HNC600)
Window/Door Sensor (KX-HNS101)
Motion Sensor (KX-HNS102)
Glass Break Sensor (KX-HNS104)
Garage Door Sensor (KX-HNS107)
Required procedures
R Hub initial setup and mobile device registration
Refer to the System Setup Guide included with your hub.
R Device registration (if you didn’t purchase the device as part of a pre-configured bundle)
Refer to the Installation Guide included with your device.
R Use the [Home Network] app to make sure the desired sensor is enabled for the [Arm: Away] arm
mode.
See “Alarm system settings”, Page 53.
R Use the [Home Network] app to set the arm mode to [Arm: Away].
See “Arming and disarming the alarm system”, Page 52.
While away from home, you can access the system and view live camera images.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R A camera
Indoor Camera (KX-HNC200, KX-HNC210)
Outdoor Camera (KX-HNC600)
Required procedures
R Hub initial setup and mobile device registration
Refer to the System Setup Guide included with your hub.
R Camera registration (if you didn’t purchase the camera as part of a pre-configured bundle)
Refer to the Installation Guide included with your camera.
R Use the [Home Network] app to access the desired camera.
See “Viewing live camera images”, Page 67.
You can configure the system to record video from a camera if motion is detected.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R An SD card (inserted in the hub)
33
Usage examples