Operating Instructions

Note:
R After pressing and confirming the sensor’s status, press again to turn off the LED
indicator and conserve battery power.
Garage door sensor LED indicator
The LED indicator on the garage door sensor does not light during normal operation. You can press
and check the LED indicator to confirm the sensor’s status.
Off No battery power
Green Door is closed
Registration mode (you pressed and held )
Red Door is open
Sensor is out of range of the hub, or is not registered to a hub
Note:
R After pressing
and confirming the sensor’s status, press again to turn off the LED
indicator and conserve battery power.
Siren LED indicator
Off
No power, or LED indicator is turned off
*1
Green Normal operation
Registration mode (you pressed and held )
Red Sensor is out of range of the hub, or is not registered to a hub
Alarm system was triggered
*1 You can configure the siren so that its LED indicator does not light in most states. See “Device
profiles (device settings)”, Page 103.
Keypad LED indicator
Off No power or normal operation
Green
Registration mode (you pressed and held )
Red Keypad is not registered to a hub
Keypad is out of range of the hub, or is not registered to a hub
Alarm system was triggered
49
Using the app