Operating Instructions

Note:
R In order to use this feature, the hub must be connected to your landline. For information about phone
line connection, refer to the System Setup Guide included with your hub.
Configuring the alert by phone call feature
1 From the [Home Network] app home screen, tap [Settings].
2 Tap [Arm Settings].
3 Tap [Alert by Phone Call].
4 Turn on the [Alert by Phone Call] switch.
5 Tap [Arm Condition].
6 Select the desired setting and then tap [OK].
– [Away/At Home]: Alert by phone call is enabled for [Arm: Away] and [Arm: At Home] arm
modes.
– [Away]: Alert by phone call is enabled for [Arm: Away] arm mode only.
7 Under [Telephone Number Setting], tap the desired memory location (1–5).
R When the system calls a phone number, it calls the phone number assigned to the lowest memory
location. If the called party does not answer or does not press
*
, the system calls the phone
number assigned to the next memory location.
R [None] is displayed for numbers with no phone number assigned to them.
8 Specify the party to be called by entering the desired name and then tap [OK]. Repeat this step and
enter the desired phone number.
R You can also select a contact that is stored in your mobile device by tapping [Add from Contacts
List].
R These settings are shared with the power outage notification feature for backup batteries
( “Configuring power outage notifications”, Page 77).
9 When finished, tap [OK].
Note:
R In order to use this feature, the hub must be connected to your landline. For information about phone
line connection, refer to the System Setup Guide included with your hub.
R Water leak sensors are always enabled. If a water leak sensor detects water while the alert by phone
call feature is enabled, the hub will call the pre-programmed phone number regardless of the current
arm mode.
Erasing phone numbers assigned to the alert by phone call feature
1 From the [Home Network] app home screen, tap [Settings].
2 Tap [Arm Settings].
3 Tap [Alert by Phone Call].
4 Open the options menu (see “Displaying the options menu”, Page 39).
R If setting this feature for use with the power outage notification feature for backup batteries
( “Configuring power outage notifications”, Page 77), continue to the next step.
5 Tap [Delete Selected Items].
6 Select the phone numbers that you want to erase, and then tap [OK].
R These phone numbers will also be erased from the power outage notification feature for backup
batteries ( “Configuring power outage notifications”, Page 77).
Languages available for alert by phone call announcements
– KX-HNB600: English
– KX-HNB600AZ: English
55
Using the app