Operating Instructions

Note:
R To adjust the camera’s speaker volume, open the options menu (see “Displaying the options menu”,
Page 39) and tap [Camera Speaker Volume].
Playing a lullaby (indoor cameras only)
You can play a lullaby using the camera’s built-in speaker.
1 From the [Home Network] app home screen, tap [Camera].
2 Tap the camera image of the desired camera.
3 Tap [Lullaby].
4 Select the desired lullaby and then tap [OK].
R The lullaby starts playing. To stop the lullaby, tap [Lullaby] again.
R Lullaby playback stops automatically after 30 minutes.
Note:
R If you talk to the camera (see “Talking to the camera”, Page 69) while a lullaby is playing, the lullaby
stops.
Adjusting the lullaby volume
While viewing a live image from the camera that is playing a lullaby, open the options menu (see
“Displaying the options menu”, Page 39) and tap [Camera Speaker Volume].
Viewing the recording list
You can use the recording list to play back recordings saved on the hub’s SD card and to confirm details
about each recording.
1 From the [Home Network] app home screen, tap [Camera].
2 Tap [Recording List].
R A list of recording dates is displayed.
3 Select a recording date.
R A list of all recordings recorded on the selected date is displayed.
R The icons displayed indicate details about each recording.
The recording was recorded when a sensor was triggered.
The recording was recorded according to a timer.
The recording was recorded manually.
Recording list options
The following items are available in the options menu (see “Displaying the options menu”, Page 39)
while viewing the recording list.
70
Using the app