Operating Instructions

To erase recordings recorded on multiple dates

Continue to the next step.

4 Open the options menu (see “Displaying the options menu”, Page 39).

To erase all recordings

Tap [Delete All].

To erase selected recordings

Tap [Delete Selected Contents], and then select the dates or recordings that you want to erase.

6 Tap [OK].

Note:

R You can also erase a recording during playback by tapping ® [OK].

Temperature alert (indoor cameras only)

You can configure the camera to send notifications if the camera’s ambient temperature is too cold or too

hot.

1 From the [Home Network] app home screen, tap [Settings].

2 Tap [Device Profiles].

3 Tap [Camera].

4 Select the device that you want to change settings for.

5 Tap [Temperature Sensor].

6 Slide the [Temperature Sensor] switch to select whether or not the system notifies you if the

camera’s ambient temperature is above or below the specified temperature.

7 Slide the [Units] switch to select whether the temperature is displayed and specified in Fahrenheit or

Celsius.

8 Tap the upper threshold of the acceptable temperature range, select the desired temperature, and

then tap [OK].

9 Repeat the previous step for the lower threshold of the acceptable temperature range.

Note:

R You can also change these settings while viewing live camera images by opening the options menu

and selecting [Indoor Camera Settings].

Confirming temperature alert history

You can view a log of previous temperature alert detections.

1 From the [Home Network] app home screen, tap [Camera].

2 Tap the camera image of the desired camera.

3 Open the options menu (see “Displaying the options menu”, Page 39).

4 Tap [Alert Log].

Camera alert log options

The following items are available in the options menu (see “Displaying the options menu”, Page 39).

[Sort]

Allows you to sort the events in the alert log.

Using the app