Operating instructions

Feature/Code Selection
Setting the recording paper
size in the paper input tray
MBNM3NM8NM0N
M1N “LETTER”: Letter-size paper
M2N “A4” (default): A4-size paper
M6N “16K”: 16K-size paper
Note:
R When “16K” is selected, received fax documents will be stored in memory
(KX-MB1520/KX-MB1530 only).
Setting the recording paper
size in the manual input tray
MBNM3NM8NM1N
M1N “LETTER”: Letter-size paper
M2N “A4” (default): A4-size paper
M3N “LEGAL”: Legal-size paper
M4N “B5(ISO)”: B5(ISO)-size paper
M5N “B5(JIS)”: B5(JIS)-size paper
M6N “16K”: 16K-size paper
M7N “216X330”
M8N “216X340”
Note:
R When you set feature #147 to “INCHES”, the numbers are displayed in
inches.
Setting the recording paper
type for paper input tray
MBNM3NM8NM3N
M1N “PLAIN PAPER” (default): 75 g/m² to 90 g/m² paper.
M2N “THIN PAPER”: 64 g/m² to 75 g/m² paper.
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 26.
Setting the recording paper
type for manual input tray
MBNM3NM8NM4N
M1N “PLAIN PAPER” (default): 75 g/m² to 90 g/m² paper.
M2N “THIN PAPER”: 64 g/m² to 75 g/m² paper.
M3N “THICK PAPER”: 90 g/m² to 165 g/m² paper.
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 26.
Setting the waiting time for
the power save mode
MBNM4NM0NM3N
To set the length of time before the unit enters power save mode.
M1N “5min” (default): 5 minutes
M2N “15min”: 15 minutes
M3N “30min”: 30 minutes
M4N “1h”: 1 hour
Note:
R When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
MBNM4NM6NM2N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
Note:
R The previous setting will be held individually for copying.
R The previous setting will be held individually for sending faxes (KX-MB1520/
KX-MB1530 only).
Setting the default operation
mode
MBNM4NM6NM3N
(KX-MB1520/KX-MB1530
only)
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
M1N “COPY” (default): Copy mode is selected as default.
M2N “FAX”: Fax mode is selected as default.
Note:
R You cannot select the scan mode using this feature.
54
8. Programmable Features