Operating Instructions
Table Of Contents
- Available features list
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Printer
- Scanner
- Copier
- Fax (KX-MB1520/KX-MB1530 only)
- Sending Faxes
- Receiving Faxes
- 6.5 Selecting the way to use your unit
- 6.6 Receiving a fax automatically : Auto answer ON
- 6.7 Receiving a fax manually : Auto answer OFF
- 6.8 Using the unit with an answering machine
- 6.9 Receive polling (retrieving a fax placed on another fax machine)
- 6.10 Junk fax prohibitor (preventing fax reception from undesired callers)
- 6.11 Receiving a fax on your computer
- Caller ID (KX-MB1520/KX-MB1530 only)
- Programmable Features
- Useful Information
- Help
- Paper Jams
- Cleaning
- General Information
- Index
– To use other paper sizes, change the
recording paper size setting (feature #380 on
page 56).
– To use thin paper, change the recording paper
type setting (feature #383 on page 56).
1 Lift the paper input tray (A), and pull it completely
out.
A
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
3 Load the paper, print-side down (A).
Important:
R Push down to lock the plate (B) in the paper
input tray, if necessary.
A
B
4 Adjust the recording paper guides. Pinch the rear
guide (A), then slide it to match the paper size mark.
Pinch the right guide (B), then slide it to adjust the
width to the size of the recording paper.
R Make sure that the recording paper is under the
paper limit mark (C), and the paper should not
be loaded over the snubbers (D).
A
B
D
C
15
1. Introduction and Installation