Operating Instructions
Table Of Contents
- Available features list
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Printer
- Scanner
- Copier
- Fax (KX-MB1520/KX-MB1530 only)
- Sending Faxes
- Receiving Faxes
- 6.5 Selecting the way to use your unit
- 6.6 Receiving a fax automatically : Auto answer ON
- 6.7 Receiving a fax manually : Auto answer OFF
- 6.8 Using the unit with an answering machine
- 6.9 Receive polling (retrieving a fax placed on another fax machine)
- 6.10 Junk fax prohibitor (preventing fax reception from undesired callers)
- 6.11 Receiving a fax on your computer
- Caller ID (KX-MB1520/KX-MB1530 only)
- Programmable Features
- Useful Information
- Help
- Paper Jams
- Cleaning
- General Information
- Index
2.7 Your fax number (KX-MB1520/
KX-MB1530 only)
You can program your fax number so that it appears on
the top of each page sent.
MSetNMRecallN MFNMEN
MMenuNMStopN
1 MMenuN A MBNM1NM0NM3N A MSetN
2 Enter your fax number, up to 20 digits.
R To enter a “+”, press MGN.
R To enter a space, press MBN.
R To enter a hyphen, press MRecallN.
R To erase a number, press MStopN.
3 MSetN
4 Press MMenuN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
R To erase all numbers, press and hold MStopN.
2.8 Installing Multi-Function
Station
2.8.1 Required computer environment
Panasonic Multi-Function Station software enables the
unit to carry out the following functions:
– Printing on plain paper, thin and thick paper and
labels
– Previewing documents and changing printer settings
before printing (Easy Print Utility)
– Scanning documents and converting an image into
text with OCR software (not supplied)
–
Scanning from other applications for Microsoft
®
Windows
®
that support TWAIN scanning and WIA
scanning (Windows XP/Windows Vista
®
/Windows 7)
– Storing, editing or erasing items in the phonebook
using your computer (KX-MB1520/KX-MB1530 only)
– Programming the features using your computer
– Sending, receiving fax documents using your
computer (KX-MB1520/KX-MB1530 only)
To use Multi-Function Station on your computer, the
following are required:
Operating System:
Windows 2000/Windows XP/Windows Vista/Windows 7
CPU:
Windows 2000: Pentium
®
P or higher processor
Windows XP: Pentium Q or higher processor
Windows Vista/Windows 7: Pentium 4 or higher
processor
RAM:
Windows 2000/Windows XP: 128 MB (256 MB or more
recommended)
Windows Vista: 512 MB (1 GB or more recommended)
Windows 7: 1 GB (2 GB or more recommended)
Other Hardware:
CD-ROM drive
Hard disk drive with at least 600 MB of available space
USB interface
Other:
Internet Explorer
®
5.0 or later
Warning:
R To assure continued emission limit compliance:
– use only shielded USB cable (Example:
Hi-Speed USB 2.0 certified cable).
R To protect the unit, use only shielded USB cable
in areas where thunderstorms occur.
Note:
R A USB cable is not supplied. Please purchase a
shielded Type-A male/Type-B male USB cable.
23
2. Preparation