Operating Instructions
Table Of Contents
- Available features list
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Printer
- Scanner
- Copier
- Fax (KX-MB1520/KX-MB1530 only)
- Sending Faxes
- Receiving Faxes
- 6.5 Selecting the way to use your unit
- 6.6 Receiving a fax automatically : Auto answer ON
- 6.7 Receiving a fax manually : Auto answer OFF
- 6.8 Using the unit with an answering machine
- 6.9 Receive polling (retrieving a fax placed on another fax machine)
- 6.10 Junk fax prohibitor (preventing fax reception from undesired callers)
- 6.11 Receiving a fax on your computer
- Caller ID (KX-MB1520/KX-MB1530 only)
- Programmable Features
- Useful Information
- Help
- Paper Jams
- Cleaning
- General Information
- Index
4.1 Scanning from the unit (Push
Scan)
You can easily scan the document by using the operation
panel on the unit. You can select one of the following
scanning modes depending on how you intend to use the
scanned image.
Scanning mode
“VIEWER”
Viewing using Multi-Function
Viewer/Quick Image Navigator
(Scan to Multi-Function
Viewer/Quick Image
Navigator)
“FILE” Saving as a file to your
computer (Scan to save as a
file)
“EMAIL” Sending as an attached file to
an email destination from your
computer (Scan to email)
“OCR” Using OCR software (Scan to
OCR)
Note:
R When scanning a document, we recommend using
the scanner glass rather than the automatic
document feeder for better results (KX-MB1530
only).
R Do not open the document cover when scanning a
document with the automatic document feeder
(KX-MB1530 only).
MStopN
MSetNMCNMDNMEN
MStartN
MScanN
1 Set the original (page 19).
2 If the MScanN light is OFF, turn it ON by pressing
MScanN repeatedly.
3 Press MCN or MDN repeatedly to select a scanning
mode. A MSetN
4 If necessary, change the scanning settings. Press
MEN, press MCN or MDN repeatedly to select the desired
setting. A MSetN
5 When using the scanner glass:
MStartN A The unit will scan 1 page. Place the next
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder
(KX-MB1530 only):
MStartN
R When scanning to Multi-Function Viewer (for
users other than Italy), the scanned image will
be displayed in the [Multi-Function Viewer]
window after scanning. However, when you
select PDF as a file format, the software that is
associated to open PDF files will start.
When scanning to Quick Image Navigator (for
users in Italy), the scanned image will be
displayed in the [Quick Image Navigator]
window after scanning.
R When scanning to email, the email software will
automatically start and the scanned image will be
attached to a new email message.
R When scanning to OCR, the scanned image will
be displayed in the OCR window after scanning.
6 After you finish scanning, press MStopN to reset the
setting you set in step 4.
Note:
R To stop scanning, see page 69.
R The following data formats can be selected to save
the scanned images.
Scanning
mode
TIFF JPEG BMP PDF
“VIEWER” U U U U
“FILE” U U U U
“EMAIL” U U k U
“OCR” U U U k
If you want to scan several pages and save as a
single file, select TIFF or PDF as the file format.
R The scanned image will be automatically saved in the
folder selected in the [Settings] window. To change
the folder, see page 26.
R You can set the desired scan mode for push scan
beforehand (feature #493 on page 66).
29
4. . Scanner
4. Scanner