Operating Instructions
Table Of Contents
- Available features list
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Printer
- Scanner
- Copier
- Fax (KX-MB1520/KX-MB1530 only)
- Sending Faxes
- Receiving Faxes
- 6.5 Selecting the way to use your unit
- 6.6 Receiving a fax automatically : Auto answer ON
- 6.7 Receiving a fax manually : Auto answer OFF
- 6.8 Using the unit with an answering machine
- 6.9 Receive polling (retrieving a fax placed on another fax machine)
- 6.10 Junk fax prohibitor (preventing fax reception from undesired callers)
- 6.11 Receiving a fax on your computer
- Caller ID (KX-MB1520/KX-MB1530 only)
- Programmable Features
- Useful Information
- Help
- Paper Jams
- Cleaning
- General Information
- Index
Feature/Code Selection
Setting the toner
maintenance time
MBNM1NM5NM8N
(KX-MB1520/KX-MB1530
only)
The unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the unit
makes during maintenance cannot be stopped. However, if the unit’s noise
bothers you, you can change the start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
R The default time is “12:00”.
R If you selected 12-hour time entry (page 21), press MHN repeatedly to
select AM or PM.
R If you selected 24-hour time entry (page 21), the time is set using
24-hour time entry.
3. MSetN A MMenuN
Resetting all features (and
deleting all data in memory)
MBNM1NM5NM9N
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB1520/KX-MB1530 only: Phonebook (or caller information) and fax
transmission data (journal report and faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord (KX-MB1520/KX-MB1530 only) and
USB cable before activating this feature.
To reset all features:
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN
Setting the ringer pattern
MBNM1NM6NM1N
(KX-MB1520/KX-MB1530
only)
M1N “A” (default)
M2N “B”
M3N “C”
Setting the beep sounds and
keytones
MBNM1NM6NM5N
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
Note:
R Even if this feature is set to “OFF”, the unit beeps in some cases. For
example:
– the memory reception alert setting (feature #437 on page 62) is
activated (KX-MB1520/KX-MB1530 only).
– the front cover is opened.
Setting the off-hook alert
MBNM1NM7NM1N
(KX-MB1520/KX-MB1530
only)
To alert you with a beeping sound when the telephone line has been left
off-hook for more than 1 minute without dialling.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You have to press MStopN or MSP-PhoneN to stop the
beeping sound.
Setting the job end
notification feature
MBNM1NM7NM4N
(KX-MB1530 only)
To set the unit to alert you with a beeping sound after the print job is finished.
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: Beep sounds will be made after documents are printed.
Note:
R This setting is valid for PC printing, printing received faxes, and printing
reports/lists automatically.
R When a printing error occurs, the unit will beep the error beep instead of this
beep, even if this feature is set to “ON”.
55
8. Programmable Features