Operating Instructions
Table Of Contents
- Available features list
- Important Information
- Table of Contents
- Introduction and Installation
- Preparation
- Printer
- Scanner
- Copier
- Fax (KX-MB1520/KX-MB1530 only)
- Sending Faxes
- Receiving Faxes
- 6.5 Selecting the way to use your unit
- 6.6 Receiving a fax automatically : Auto answer ON
- 6.7 Receiving a fax manually : Auto answer OFF
- 6.8 Using the unit with an answering machine
- 6.9 Receive polling (retrieving a fax placed on another fax machine)
- 6.10 Junk fax prohibitor (preventing fax reception from undesired callers)
- 6.11 Receiving a fax on your computer
- Caller ID (KX-MB1520/KX-MB1530 only)
- Programmable Features
- Useful Information
- Help
- Paper Jams
- Cleaning
- General Information
- Index
3. Close the front cover.
11.1.2 When the recording paper is not fed
into the unit properly
The display will show the following:
– “CHECK PAPER #1 PRESS START”
1 Pull the paper input tray completely out.
2 Re-load the recording paper.
3 Insert the paper input tray into the unit.
Note:
R If the message is still displayed, check the recording
paper specifications and load the recording paper
again. See page 14 for details.
11.1.3 When the recording paper in the
manual input tray is not fed into the unit
properly
The display will show the following.
– “CHECK PICK UP INPUT TRAY #2”
1 Remove the recording paper.
2 Re-insert the recording paper.
Note:
R If the message is still displayed, check the recording
paper specifications and re-install recording paper.
See page 17 for details.
83
11. Paper Jams