Operating Instructions

11.4.8 Using an answering machine
Problem Cause & Solution
I cannot receive documents
automatically.
R Your greeting message on the answering machine is too long. Shorten the
message. Record a message less than 10 seconds long.
R The answering machine rings too many times. Set to 1 or 2 rings.
I cannot receive voice
messages.
R Check if the answering machine is turned ON and connected to the unit
properly (page 78).
R Set the number of rings on the answering machine to 1 or 2.
I pressed the remote access
code to access the answering
machine remotely, but the line
was disconnected.
R The code may include “#” which is used for certain features provided by
telephone companies. Change the code on the answering machine to
another number which does not include “#”.
11.4.9 If a power failure occurs
R The unit will not function.
R Any documents currently in the memory (i.e. during copying, PC printing) will be lost.
Fax supported models only (y):
R The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
R Fax transmission and reception will be interrupted.
R Documents during fax transmission or fax reception will be lost.
R When power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
11.4.10 Firewall setting tool for Microsoft Windows users (LAN supported models only) y
After installing Microsoft Windows XP Service Pack 2 or later/Windows Vista/Windows 7, you will not be able to use
the following functions because the Windows Firewall feature will be activated and block the connection.
– Device Monitor
– LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the
above functions properly.
1 Insert the CD-ROM that is supplied with the unit into your CD-ROM drive.
R If the [Select Language] dialogue box appears, select the desired language that you want to use with this
software. Click [OK].
2 [Tools] A [Windows Firewall Setting]
3 [Add to the exceptions list] A [OK] A [OK]
To confirm the security settings (For Windows XP users)
1. [Control Panel] A [Security Center]
2. [Windows Firewall]
3. Click the [Exceptions] tab.
4. Confirm that [Panasonic Trap Monitor Service] and [Panasonic LPD] are displayed and checked on the
[Programs and Services] list.
To confirm the security settings (For Windows Vista users)
1. [Control Panel] A [Security Center]
2. [Windows Firewall]
3. [Change settings]
4. [Continue]
5. Click the [Exceptions] tab.
6. Confirm that [Panasonic Trap Monitor Service], [Panasonic LPD Manager] and [Panasonic LPD] are
displayed and checked on the [Program or port] list.
115
11. Help