Operating Instructions

4 MCDN: Select the page layout. A MOK/SETN
5 MCDN: Select the edge you want to set the margin for. A MOK/SETN
6 Enter margin width using the dial keypad. A MOK/SETN
7 If necessary, enter the number of documents (up to 99).
8 Mx/STARTN
Note:
R After you finish copying, press Mw/STOPN to reset this feature.
R To automatically reduce the copies according to the set margin, see feature #474.
R This feature and page layout features cannot be used at the same time.
R You can hold the previous margin setting (feature #475).
7.2.11 Copy reservation
You can make a copy reservation under the following conditions:
– while the unit is printing documents from your computer.
– while the unit is printing received fax documents (fax supported models only). (y)
1 Set the original.
2 While “PC PRINTING” or “PRINTING”
*1
is displayed, switch to copy mode, then press Mx/STARTN.
*1
Displayed only for models that support the fax feature. (y)
3
Make necessary settings such as number of copies, resolution, zoom features and page layout features. A
Mx/STARTN
R “COPY RESERVED” will be displayed. The unit will start copying after the current printing job has finished.
72
7. Copying