Operating Instructions

Quick Reference Guide for VL-V900

This document explains the basic operations of the VL-V900. For further details, refer to the operating

instructions of the VL-V900 on the web.

http://panasonic.net/pcc/support/intercom/v900

Controls

Lobby Station

A Heat sensor

Turns on the display when a visitor is detected.

B Lens cover

C Light

Illuminates subjects in dark environments.

D Display

E Keypad

F Speaker

G Camera lens

H Microphone

I Search buttons (

and )

Used to select items shown on the display, adjust settings, etc.

J Cancel button (

)

K Call button (

)

Image viewing screen of the main monitor

Image from lobby station Image from camera

Camera

Lobby

Status icons

Indicates which lobby station is calling, monitoring, or talking. ("1" indicates the device number)

Indicates which camera is monitoring. ("1" indicates the device number)

Indicates the doorphone is calling, monitoring, or talking.

Indicates the other person (lobby station or PBX extension) is calling when monitoring or talking

with the doorphone.

#PNQW4906YA

C0915HH1046

PAGE 1
Quick Reference Guide for VL-V900 This document explains the basic operations of the VL-V900. For further details, refer to the operating instructions of the VL-V900 on the web. http://panasonic.net/pcc/support/intercom/v900 Controls Lobby Station A B C G A Heat sensor Turns on the display when a visitor is detected. H B Lens cover C Light Illuminates subjects in dark environments.
PAGE 2
Basic operation Enter the room number with the keypad → { }. When the ringer tone is heard, press {TALK}. L Confirm the caller before answering. Other operation At the lobby station Searching by first letter of the name 1 Press { 2 Press { 3 Press { } → use the keypad to enter the first letter of the resident’s name. } or { } to search for the desired name. } to call. Opening the door by entering an unlock code 1 Press {#} → enter the 4-digit unlock code.