Operating Instructions
Basic operation
Enter the room number with the keypad → { }.
When the ringer tone is heard, press {TALK}.
L Conrm the caller before answering.
Other operation
At the lobby station
Searching by rst letter of the name
1 Press { } → use the keypad to enter the rst letter of the resident’s name.
2 Press { } or { } to search for the desired name.
3 Press { } to call.
Opening the door by entering an unlock code
1 Press {#} → enter the 4-digit unlock code.
L For information about the unlock code, please contact your building manager.
2 Press { } to unlock.
Switching the image displayed on the main monitor
While talking to the main monitor, press {#} to switch the image displayed on the main monitor from the lobby
station to the camera. To return to the lobby image, press {
}.
At the main monitor
Monitoring the lobby station or camera image
1 Press → select the desired destination → .
L If a camera is connected to the lobby station, you can alternate monitoring between the lobby station and
camera by pressing
Camera
or
Lobby
.
Opening the door
You can open the lobby door while talking or monitoring the lobby station image. Press to open the door.
Calling the PBX extension
1 Press { } → select the desired destination → → .
Please note the following system conditions and limitations.
L Only one call or monitoring session can be handled at a time.
Low priority: Monitoring
Medium priority: General calls (lobby station to main monitor, main monitor to PBX extension, etc.)
High priority: Emergency calls
L All calls and monitoring sessions are disconnected after the pre-programmed "timeout" time elapses.
L Following features are not available for the lobby station:
– Zoom position settings
– Wide/Zoom settings
– Doorphone connection settings
L In order to perform the above operations, optional devices and conguration for those devices are required.
Contact your building manager for more information.