Operating Instructions

Setting up
Connections
n
Base unit
Connect the AC adaptor plug to the unit
u
ntil you hear a click.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
o
utlet.
Connect the telephone line cord to the
u
nit until you hear a click.
Fasten the cord by hooking it.
Connect the telephone line cord to the
t
elephone line jack until you hear a click.
A DSL/ADSL filter (not supplied) is
r
equired if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226E.
R Use only the supplied telephone line cord.
14
76
3
25
Battery installation
R U
SE ONLY rechargeable Ni-MH batteries
AAA (R03) size (A).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R C
onfirm correct polarities (
, ).
1
R F
ollow the directions on the display to set
up the unit.
Battery charging
C
harge for about 7 hours.
R Confirm “Charging” is displayed (A).
R When the batteries are fully charged,
“Fully charged” is displayed.
1
Note when setting up
Note for connections
R T
he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
10
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Getting Started
PNQX6032YA_0529_ver110.pdf 10 2013/05/29 12:39:47