Operating Instructions

R T
he following are used for both uppercase and lowercase:
Cyrillic character table ( ) (Not available for SMS)
z
y
1
2 3 4 5 6 7 8 9
1
4
9
Error messages
Display message Cause/solution
Base no power
o
r
No link to base.
Reconnect main
base AC adaptor.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been cancelled.
Re-register the handset (page 32).
Check
P
hone Line
R The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 10).
Error
R R
ecording was too short. Try again.
Invalid Number
R Y
ou tried to send an SMS message to a phone number saved
in the phonebook, caller list, or redial list that is over 20 digits
long.
Memory Full
R T
he phonebook memory is full. Erase unwanted entries
(page 19).
R Message memory is full. Erase unwanted messages
(page 41).
R The call barred list memory is full. Erase unwanted entries
(page 29).
R The schedule alarm memory is full. Erase unwanted entries
(page 32).
R The maximum number of base units (4) is already registered
to the handset. Cancel unused base unit registrations from
the handset (page 33).
50
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Useful Information
PNQX6032YA_0529_ver110.pdf 50 2013/05/29 12:39:49