Operating Instructions

Problem Cause/solution

I cannot operate the

nswering system

remotely.

R The remote access code is not set. Set the remote access

code (page 45).

R You are entering the wrong remote access code. If you have

forgotten your remote access code, enter the remote access

code setting to check your current code (page 45).

R The answering system is turned off. Turn it on (page 46).

The unit does not emit the

pecified number of rings.

R If the first ring is turned off, the number of rings decreases by 1

from the specified number of rings.

Liquid damage

Problem Cause/solution

Liquid or other form of

oisture has entered the

handset/base unit.

R Disconnect the AC adaptor and telephone line cord from the

base unit. Remove the batteries from the handset and leave to

dry for at least 3 days. After the handset/base unit are

completely dry, reconnect the AC adaptor and telephone line

cord. Insert the batteries and charge fully before use. If the unit

does not work properly, contact an authorised service centre.

Caution:

R T

o avoid permanent damage, do not use a microwave oven to speed up the drying process.

Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333

Useful Information

PNQX6032YA_0529_ver110.pdf 55 2013/05/29 12:39:50