Operating instructions

Editing an outside monitoring number
1 P
ress MMenuN on the handset being
monitored.
2 MbN: “On/Off” a MSelectN
3 MbN: “On” a MSelectN
4 MbN: Select the outside line. a MEditN
5 MMenuN a MbN: “Edit” a MSelectN
6 Edit the name if necessary. a MOKN
7 Edit the phone number if necessary. a
MOKN a MSelectN
Erasing an outside monitoring
n
umber
1 Press MMenuN on the handset being
monitored.
2 MbN: “On/Off” a MSelectN
3 MbN: “On” a MSelectN
4 MbN: Select the outside line. a MEditN
5 MMenuN a MbN: “Erase” a MSelectN
6 MbN: “Yes” a MSelectN a MOFFN
Baby monitor sensitivity
Y
ou can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1 Press MMenuN on the handset being
monitored.
2 MbN: “Sensitivity level” a
MSelectN
3 MbN: Select the desired setting. a
MSaveN a MOFFN
Answering the baby monitor
n W
hen monitoring with a handset:
Press M
N
to answer calls.
If you want to respond from the monitoring
handset, press MMuteN.
R T
he monitoring handset will answer calls
automatically when the auto intercom
feature is set to “On” (page 16).
Note:
R If you receive an outside call when
communicating with the monitored
handset, you hear 2 tones. To answer
the call, press MOFFN, then press M
N.
n W
hen monitoring from an outside line:
To answer a call, follow the operation for
your phone.
If you want to respond from the monitoring
handset, press #1 using tone dialing.
You can turn off the baby monitor feature
by pressing #0.
Note:
R 2 minutes after the monitored handset
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
Other programming
Changing the handset name
E
ach handset can be given a customized
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” to “Handset 6” is displayed.
1 MMenuN (right soft key) #104
2 Enter the desired name (10 characters
max.).
3 MSaveN
4 MbN: Select the desired setting. a
MSelectN 2 times a MOFFN
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
For assistance, please visit http://www.panasonic.com/help
31
Programming
PRW130USA(en)_0311_ver110.pdf 31 2014/03/11 12:58:57