Installation Manual Additional Digital Cordless Handset Model No. KX-PRSA10 KX-PRSA10E KX-PRWA10E KX-PRWA10 Thank you for purchasing a Panasonic product. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: - KX-PRS120 (KX-PRSA10) - KX-PRW120 (KX-PRWA10) (The corresponding models are subject to change without notice.) You must register this handset with your base unit before it can be used.
Installation Accessory information Supplied accessories Accessory item/Part number Quantity Charger*1 1 AC adaptor/PNLV233EKZ 1 Rechargeable batteries*2 2 Handset cover*3 1 *1 *2 *3 KX-PRSA10: PNLC1047ZW (White) KX-PRWA10: PNLC1046ZW (White) Please read the base unit’s operating instructions for replacement battery information. The handset cover comes attached to the handset. Note: R Please read the base unit’s operating instructions for additional/replacement accessories.
Installation Setting up Connections Connect the AC adaptor plug to the unit until you hear a click. Connect the AC adaptor to the power outlet. KX-PRSA10: Fasten the cord by hooking it. n KX-PRSA10 n KX-PRWA10 1 2 1 3 2 Note: R Use only the supplied Panasonic AC adaptor PNLV233E. R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Battery installation/Battery charging Important: R Use the supplied rechargeable batteries.
Installation n KX-PRSA10 2 1 n KX-PRWA10 2 1 Note: R The handset display may show “Please wait for 1 minute.” when the handset is placed on the charger if it is not registered to the base unit. R If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. Registering the handset to the base unit Ensure that the handset is switched on.
Installation n KX-PRSA10 {x} n KX-PRWA10 {x} 3 Handset: Place the handset on the base unit or charger. R Continue the operation even when the handset display shows “Please wait for 1 minute.”. 4 With the handset still on the base unit or charger, wait until a confirmation tone is displayed. sounds and Note: R If an error tone sounds, or if is displayed, register the handset according to the base unit’s operating instructions.
Installation R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. CAUTION Installation and location R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.
Installation Other information R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder.
Installation For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union These symbols (A, B, C) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Notes 9 PRWA10E_PRSA10E(en)_0508_ver012.
Sales Department: Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan © Panasonic System Networks Co., Ltd. 2013 *PNQX6061ZA* *PNQX6061ZA* PNQX6061ZA PRWA10E_PRSA10E(en)_0508_ver012.