Operating instructions

130
Care and Maintenance
Scanner Status Dialog Box
# This box shows an error or status message and the corresponding icon.
$ This box lists the mode your scanner is in, device name (scanner), and the
interface cable being used, and the name of the scan job.
% This button minimizes the Panasonic Scanner Display dialog box. Pressing the
ESC key on the keyboard can also minimize it.
& This button displays the Status Display Setup dialog box, where you can change
different settings.
' This button displays the version of the Status Display.
( This button resumes scanning after recovering from an error situation.
) This button cancels the scan job which caused an error.
* This button displays the Panasonic Show configuration dialog box.
+ This button displays the previous recovery message.
, This button displays the initial recovery message.
- This button displays the next recovery message.
. This box displays a recovery procedure along with a picture.
#
$
%&' *
+()
.
-,
/
0