FEATURES GUIDE

General Features
Features Guide 143
* When the contract of your system is point-to-multipoint and if you forget to assign an MSN
number at SSD & ICH locations 500-699, the system will not receive calls with that MSN.
An outside call is made.
Yes
No
Is the CLIP or DDI/MSN number
assigned at the location 000-499 for
CLIP or 500-699 for DDI/MSN?
Checks the CLIP and DDI/MSN number
through the SSD & ICH numbers from 000
to 699. [001] (As a result, the CLIP numbers
will be analysed first.)
Checks ICH table number either Day or
Night mode. [024]
The call will be handled depending on
ICH table assignment.
The call will be received at an extension
depending on the handling table number 61
(for Day mode) or 62 (for Night mode).
There might be a case that 61 and 62
will not distribute calls.*
Assigned
Not assigned
When "BV" is selected in
programme [455].
When "DISA" is
selected in
programme [455].
When "Disable "
is selected in
programme [455].
None of the BV
resources are available.
ABCC
Flowchart of possible cases and results for the Intelligent Call Handling
[***]: indicates the related/required system
programming numbers for each assignment.