FEATURES GUIDE

General Features
148 Features Guide
Note
• There might be the case that you want to use the CLIP number of Mr. A as a System Speed
Dialling number but want calls from him received by the extensions that have a DDI/MSN
match.
In this case, be sure not to assign the Handling Table number for his CLIP in
programme [024] Intelligent Call Handling Table. His number will be analysed twice: once
for his CLIP (the handling table will not route the call) and then again for DDI/MSN he
dialled (the handling table will route the call).
Recommendation of Intelligent Call Handling Table Assignments
Several recommendations of Intelligent Call Handling table assignments in certain cases are
shown below. After examining the following case studies, determine which case is suitable for
your application. (See Intelligent Call Handling Table Assignment on the next page.)
Assigned
C
Checks the ringing extension
assigned in programme [453] .
Checks the ringing extension
assigned in programme [454].
The assigned extension will ring.
When "Disable " is selected
in programme [455] .
Assigned
The assigned extension will ring.
Not assigned
Not assigned
1:N
Checks the ringing patern
assigned in programme [452].
1:1
Immediate/delayed ringing.
Immediate ringing.
Checks the ringing extension
assigned in programme [454].
AssignedNot assigned
The assigned extension will ring.
[***]: indicates the related/required system
programming numbers for each assignment.