FEATURES GUIDE

General Features
152 Features Guide
Conditions
• You can assign CLIP numbers at System Speed Dialling locations 000-499. DDI/MSN
numbers can be assigned at locations 500-699. We recommend that wild card numbers for
CLIP be stored starting at location 499, and then 498, 497, etc. That is, go backwards
numbers starting 499.
We recommend the preceding because if you assign the wild card number "9-
012 " at location 000, then all calls that start with "012" will be processed
according to that routing — even though you assign "9-0123456789" at another location.
This is because the CLIP or called party's number is analysed sequentially from 000 to 699.
• When you assign a wild card, be sure to enter all the digits.
For example, when the telephone number has 10 digits and you want to assign an area code
as the wild card, assign "9-012 ". ("012" is an example of an area code.)
• If you assign a wild card number at the locations 000-499, the name assigned in programme
[002] System Speed Dialling and Intelligent Call Handling Name Set will not be displayed
when receiving the call.
• A maximum of 24 DDI/CLIP keys can be located at CO buttons on DPT. The LED indicator
of the DDI/CLIP key flashes green when receiving a call from the CLIP number, or with
the DDI/MSN number, you assigned at SSD & ICH table. The extensions assigned in
programme [452] Extension Ringing Assignment can answer the call by pressing the
flashing DDI/CLIP key.
• If extensions, belonging to a hunting group, log out, incoming calls will be handled
depending on ICH table 61 (day) or 62 (night).
• The Forwarding/Do Not Disturb features are available except for forwarding ICH 1:N calls
to the personal message box.
1:N
Ringing
Flashing
Red
Flashing
Red
Flashing
Green
OFF