FEATURES GUIDE

General Features
158 Features Guide
LCR Programming consists of the following items:
Common Tables
1. [7000] LCR Mode
This program is used to turn on or off the LCR mode. If turned off, calls are sent to CO lines
selected according to the Automatic Access CO Port Assignment table (Program [103]). If
turned on, calls are sent to appropriate lines according to LCR programming tables.
(Default=Disable)
If LCR mode is turned on, the user-dialled number is compared with the following tables:
2. [7002] BTL Access Code
This program is used to store the British Telecom Line (BTL) Access Code. (Default=121)
If the system finds out the same number as the user-dialled number in this table, the call is
sent to the CO lines selected from the Automatic Access CO Port Assignment table
(Program [103]).
3. [311] Emergency Dial Number Set
This is used to store emergency dial numbers. The dial numbers defined in this table are not
applied to LCR and Toll Restriction. If the system finds out the same number as the user-
dialled number in this table, the call is sent to the CO lines selected from the Automatic
Access CO Port Assignment table (Program [103]).
4. [103] Automatic Access CO Port Assignment
Usually this table is used for automatic line access in non-LCR mode. In LCR mode, if the
system cannot find out the dialled number in Carrier Access Tables or LCR Routing Plan
Tables, or if the system finds out the same number as the user-dialled number in Emergency
Dial Number Set table or LCR Exceptional Code Set table, this table is used to select a CO.
Standard Rate
(8 a.m.–9 a.m. and 1 a.m.–6 p.m.,
Mon.–Fri.)
0.75 1.50
•••
3.50
Cheapest Rate
(6 p.m.–8 a.m., Mon.–Fri.)
(6 a.m., Fri.–8 p.m., Mon.)
0.50 1.00
•••
2.00
Emergency dial table
Entry Dial
1999
2112
•
•
•
•
•
•
10
Example of Charged Fee for Carrier
Area Area 1 Area 2 ••• Area 8