FEATURES GUIDE

General Features
Features Guide 161
I : Insert an Itemised code
H: Home Position – the original number is put here
A maximum of 16 commands can be assigned to a carrier.
4. [7X24] LCR Authorisation Code
This is used to register an authorization code of a carrier to a CO line. The code is inserted
at the 'A' position of the LCR Carrier Modify Command.
Example
Authorization code table
5. [7003] Itemised Code Set and [7004] ISDN Itemised Code Set
This is used to register an itemised code of an extension. The code is inserted at the 'I'
position of the LCR Carrier Modify Command.
Example
Itemised code table
6. [7X20] LCR Exceptional Code
This table is used to assign area codes that are excepted from LCR routing plans of the
specified carrier. If the system finds out the same number as the user-dialled area code in
this table, the call is sent to the CO line selected from Automatic Line Access CO Port
Assignment table.
Example
LCR exceptional code table
CO
No.
Authorization
Code
01 11111
02 22222
03 33333
•
•
•
•
•
•
24 12121
Extension
No.
Itemised Code
201 201
202 202
203 203
•
•
•
•
•
•
364 364