FEATURES GUIDE

General Features
270 Features Guide
TR N/A N/A N/A N/A :
Directly transfers to an overflow extension.
RT N/A N/A N/A N/A :
Waits for an idle extension. The caller hears a ringback tone.
(Intercept Routing No Answer (IRNA) works.)
N/A N/A N/A N/A :
Waits for an idle extension. The caller hears a ringback tone. (IRNA works.)
1T :
Waits for an idle extension. The caller hears a ringback tone. (IRNA does not work.)
1T RT N/A N/A N/A :
Waits for an idle extension. The caller hears a ringback tone. (IRNA does not work.)
1T TR N/A N/A N/A :
Waits for an idle extension for 16 seconds and then transfers to an overflow extension.
Note
N/A: not available for assignment.
Note
The UCD Time Table is not available for incoming extensions or transferred calls.
The overflow extension is the IRNA destination of the hunting group or the CO line group
assigned by programme "[134-135] Hunting Intercept Day/Night" or "[457] Intercept
Extension ". If both of them are assigned, the IRNA destination of the hunting group will
be effective.
If the overflow extension is not assigned, the system will not answer the call and waits for
an idle extension.
If the Time Table number is not assigned, the system will not answer the call. In this case,
IRNA will be employed.
In sequence assignment, "Sx" can be assigned to a space other than the first only when
another "Sx" is assigned in the first space.
In sequence assignment, an assignment after "TR", "RT" or "Blank" is not available.
If a timer is the first item in a Time Table sequence, it will delay answering according to the
Timer's setting. The caller will hear a ringback tone.
Music on Hold after an OGM can be changed to a ringback tone by programme "[990]
System Additional Information, Area 01 Bit 1."
Conditions
UCD can be used in the following cases:
a) The floating number of UCD is assigned as Intelligent Call Handling destination.
b) The floating number of UCD is assigned as the Intercept Routing destination.
c) The floating number of UCD is dialled from an extension.
d) The floating number of UCD is assigned as the UCD Overflow destination.