FEATURES GUIDE

General Features
276 Features Guide
• A maximum of 2 jacks can be assigned: Be sure to connect the VPS to the SLT jacks (Jack
X-2). Otherwise, the VPS cannot receive the DTMF signal. See 2.4.3 Extension Connection
and 2.4.4 EXtra Device Port (XDP)/Parallelled Telephone Connection in Installation
Manual.
• A VPS can be assigned as the destination of the following features:
Call Forwarding — All Calls
Call Forwarding — Busy
Call Forwarding — Busy/No Answer
Call Forwarding — No Answer
Intelligent Call Handling — Distribution of Incoming Outside Calls
Intercept Routing(— No Answer)
In these functions, the caller to the extension need not know the mailbox number of the
called extension because the code is automatically transmitted to the VPS (Follow On ID
function). If a Intelligent Call Handling 1:N call is transferred to the VPS by IRNA, your
system transmits the mailbox number of the lowest jack number of the receiving extensions.
• A mailbox number is a respective extension number by default. The mailbox number can
be changed, only if programme "[990] System Additional Information, Area 02 — Bit 8"
is set to "free."
• Pressing the Voice Mail Transfer button and dialling the extension number allows the
extension user to transfer to the corresponding mailbox. In this case, Follow On ID function
is available.
• The Voice Mail extension should be set to Data Line Security to achieve proper recording.
• The Voice Mail, the Built-in Voice Message and the Message Waiting features share the
function of the MESSAGE button. For the detailed operation, refer to 2.8.2 If a Voice
Processing System is Connected in User Manual.
Installation Manual References
• 2.4.3 Extension Connection
• 2.4.4 EXtra Device Port (XDP)/Parallelled Telephone Connection
Programming Guide References
• [005] Flexible CO Button/PF Key Assignment
• [100] Flexible Numbering
• [106] Station Hunting Type
• [113] Voice Mail Status DTMF Set
• [114] Voice Mail Command DTMF Set
• [131] Hunting Group Assignment
• [457] Intercept Extension
• [609] Voice Mail Access Codes
• [990] System Additional Information