FEATURES GUIDE
General Features
Features Guide 85
To meet the user's various needs, DSS buttons can be changed to the other function buttons.
• PF (Programmable Feature) buttons printed as F1 through F16:
These buttons are provided with no default setting. The paired telephone user can
program the buttons for the other function buttons.
• ANSWER button:
Used to answer an incoming call to the paired telephone.
• RELEASE button:
Used to disconnect the line during or after a conversation or to complete a Call Transfer.
Conditions
• Programming the DSS and PF buttons can be done only from the paired telephone using
Station Programming or System Programming and Diagnosis with Personal Computer.
System Programming with a Digital Proprietary Telephone is not available.
• If the extension number assigned to a DSS button is changed to another number, the DSS
button automatically follows the new number. (Re-programming is not necessary.)
• If a port connected to a Console is programmed for XDP jack, a single line telephone can
be connected to the port in parallel.
Installation Manual References
• 2.4.3 Extension Connection
Programming Guide References
• [007] Console Port and Paired Telephone Assignment
• [600] EXtra Device Port
Features Guide References
• Button, Flexible
• EXtra Device Port (XDP)
• One-Touch Transfer by DSS Button
Busy Lamp Field Table
Light State of extension
Off
On
Idle
Busy/DND