TG103x_QG(e).fm 1 ページ 2008年8月8日 金曜日 午後4時27分 Model No. KX-TG1032 KX-TG1033 KX-TG1034 KX-TG1035 Quick Guide Setting up Base unit CHARGE 7 HOURS Use only the included Panasonic AC adaptor PQLV207 or PQLV219. “Click” (120 V AC, 60 Hz) Press plug firmly. “Click” Hook To single-line telephone jack (RJ11C) Confirm “Charging” is displayed. Noise filter (For DSL service users) Handset USE ONLY Ni-MH batteries AAA (R03) size. Do NOT use Alkaline/Manganese/Ni-Cd batteries.
TG103x_QG(e).fm 2 ページ 2008年8月8日 金曜日 午後4時27分 Operating tips { }: shows button names. Using the navigator key Press {^}, {V}, {<}, or {>} to navigate through menus and to select items shown on the display. {^} {<} Adjusting audio volume Press {^} or {V} repeatedly while talking. {>} {V} Date and time (Handset) 1 2 3 4 5 {MENU} {V}/{^}: “Set date & time” i {OK} {V}/{^}: “Date and time“ i {OK} Enter the current month, day, and year by selecting 2 digits for each.
TG103x_QG(e).fm 3 ページ 2008年8月8日 金曜日 午後4時27分 Basic operation (Handset) Feature Operation Adjusting the receiver/speaker Press {^} or {V} repeatedly while talking. volume Making a call using the redial list {REDIAL} i {V}/{^}: Select the desired phone Viewing the caller list and calling back {MENU} i {V}/{^}: “View Caller ID” i {OK} Ringer volume 1 2 3 4 5 Answering call-waiting call (2nd call) number. i {C} i Press {V} or {^} repeatedly to select the desired item.
TG103x_QG(e).fm 4 ページ 2008年8月8日 金曜日 午後4時27分 Frequently asked questions Question Cause/solution How can I increase handset volume level? L Press navigator key {^} repeatedly while talking. Why is the conversation noisy or cutting off? L Try to relocate the base unit so that distance from location to use the handset will be minimized. L Send your unit to service, if your unit has same problem when the handset is next to the base unit.
TG103x_QG(e).fm 5 ページ 2008年8月8日 金曜日 午後4時27分 Quick troubleshooting 1 Handset shows: “No link to base. Move closer to base, try again.” Place the handset on the base unit, then check if “Charging” is displayed. “Charging” is not displayed. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. “Charging” is displayed. “Charging” is displayed, now. “Charging” is still not displayed. Lift the handset, then try again.
TG103x_QG(e).fm 6 ページ 2008年8月8日 金曜日 午後4時27分 Quick troubleshooting 2 No dial tone is heard from handset. Lift up the handset from the base unit or charger. Press {C} (TALK) at the handset, then check if the display shows “Talk”. No link to base. Move closer to base, try again. 5 “No link to base. Move closer to base, try again.” is displayed. {C} Talk w Press {s} (SP-PHONE), then check if the dial tone is heard from the speaker on the back. No dial tone Try remedy for 1 on previous page.
TG103x_QG(e).fm 7 ページ 2008年8月8日 金曜日 午後4時27分 Registering a handset to base unit The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset. Handset 1 {MENU} 2 {V}/{^}: “Handset settings” i {OK} 3 {V}/{^}: “Registration” i {OK} 4 {V}/{^}: “HS registration” i Press LOCATOR on base for 4sec Then press OK 0w4 5 {MENU}{OK} {OK} Base unit Press and hold {LOCATOR} until the registration tone sounds.
TG103x_QG(e).fm 8 ページ 2008年8月8日 金曜日 午後4時27分 IMPORTANT! If your product is not working properly. . . 1 Read this Quick Guide or Operating Instructions L If you lost Operating Instructions, you can download at http://www.panasonic.com/help 2 Visit our website: http://www.panasonic.com/help L FAQs and troubleshooting hints are available. 3 Contact us via the web at: http://www.panasonic.