Operating Instructions

8
Preparation
Symbols used in these
operating instructions
Display language
13 display languages are available.
You can select “ENGLISH”, “SLOVENSKY”,
“CESTINA”, “HRVATSKI”, “SLOVENSCINA”,
“EESTI”, “LIETUVISKAI”, “LATVIESU”,
“ROMANA”, “BULGARSKI”, “SRPSKI”,
“MAKEDONSKI”, or “SHQIP”.
1 {j/OK}
2 Press {e} or {v} to select “SETTING
HS”. i {>}
3 Press {e} or {v} to select “DISPLAY
OPT”. i {>}
4 Press {e} or {v} to select “LANGUAGE”.
i {>}
5 Press {e} or {v} to select the desired
language. i {>} i {ih}
Note:
L If you select a language you cannot read,
press {ih}, {j/OK}, press {v}, press
{>}, press {v} 3 times, press {>}, press
{v} 2 times, press {>}, select the
desired language, then press {>}. Press
{ih}.
Dialling mode (tone/pulse)
Change the dialling mode depending on
your telephone line service.
“1” (Tone): Select when you have a touch
tone service.
“2” (Pulse): Select when you have rotary or
pulse service.
1 {j/OK}
2 Press {e} or {v} to select “SETTING
BS”. i {>} i {3}
3 Enter base unit PIN (default: “0000”).
L If you forget your PIN, see page 18.
4 {1}
5 Select the desired setting by pressing {1}
for tone dialling mode or {2} for pulse
dialling mode.
6 {>} i {ih}
Date and time
1 {j/OK}
2 Press {e} or {v} to select “SETTING
BS”. i {>} i {*}
3 Enter the current hour and minute (24-
hour time entry).
L If you make a mistake, press {C}.
Digits will be cleared from the right.
4 {>} 2 times i {*} 2 times
5 Enter the current day, month, and year.
L If you make a mistake, press {C}.
Digits will be cleared from the right.
6 {>} i {ih}
If “HS NO” is selected for
standby mode display (page
11) and the current handset
number is 2, “[2]” is
displayed.
4 new calls
When new calls have been received, the
display will show the number of new calls.
Symbol Meaning
{j/OK} Press {j/OK}.
i Proceed to the next
operation.
“ ” Select the words in quotations
shown on the display (e.g.,
“SETTING HS”) by pressing
{e} or {v}.
Icons Meaning
TG1100_1102FX(e-e).book Page 8 Monday, June 9, 2008 2:09 PM