Operating Instructions

Useful Telephone Settings
14
5 Enter the desired hour and minute (24 hour time entry). i {>}
6 {v}/{e}: Select the desired setting. i {>} i {ih}
Call bar
Call bar feature prohibits outside calls from being made. When call bar is
turned on, only emergency calls can be made. To store emergency
numbers, see page 15.
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “CALL OPT” i {>}
4 {v}/{e}: “CALL BAR” i {>}
5 Enter handset PIN (default: “0000”).
L If you forget your PIN, see page 21.
6 {v}/{e}: Select the desired setting. i {>} i {ih}
Direct call
Direct call feature allows you to dial a preset phone number simply by
pressing {C}. No dialling is necessary.
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “CALL OPT” i {>}
4 {v}/{e}: “DIRECT NO” i {>}
5 Enter a phone number (24 digits max.). i {j/OK} 2 times
6 {v}/{e}: “ON” i {>} i {ih}
Note:
L When this feature is turned on, only the direct call number can be called.
Changing the handset PIN
For security, the handset PIN must be entered when changing certain
settings. If you change the PIN, please write down your new PIN as the unit
will not reveal it to you again.
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “OTHER OPT” i {>}
4 {v}/{e}: “HSPIN CHANGE” i {>}
5 Enter the current 4-digit handset PIN.
L If you forget your PIN, see page 21.
6 Enter the new 4-digit handset PIN.
7 Enter the new 4-digit handset PIN again. i {ih}
Resetting the handset
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “RESET HS” i {>}
4 Enter handset PIN (default: “0000”).
L If you forget your PIN, see page 21.
5 {v}/{e}: “YES” i {>} i {ih}
TG1311_1312_1313EG(e).book Page 14 Tuesday, October 21, 2008 5:04 PM