Operating instructions

Useful Information
42 For assistance, please call 1-800-211-PANA (7262).
Making/answering calls, Paging
Phonebook
Problem Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L Move the handset and the base unit away from other
electrical appliances.
L Move closer to the base unit.
L Raise the base unit antenna.
L Turn on the clarity booster feature (page 19).
L If your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
The handset does not
ring.
L The ringer volume is turned off. Adjust it (page 31).
I cannot make a call. L The dialing mode may be set incorrectly. Set the dial
mode (page 33) to match the type of telephone service
you have (tone or pulse).
I cannot redial by
pressing {REDIAL}.
L If the last number dialed was more than 48 digits long,
the number will not be redialed correctly.
L If you press {REDIAL} after you have started dialing,
this button functions as the {PAUSE} button. To redial,
do not dial any numbers before pressing {REDIAL}.
I cannot make long
distance calls.
L Make sure that you have long distance service.
I cannot page the
handset.
L The called handset is too far from the base unit.
L The called handset is in use. Try again later.
Problem Cause & solution
I cannot store an item in
the phonebook.
L You cannot store an item in the phonebook while the
handset is in talk or speakerphone mode.
L Do not pause for over 1 minute while storing.
While storing an item in
the phonebook, the
handset starts to ring.
L A call is being received. Answer the call and start again
from the beginning after hanging up.
The display exits the
phonebook while
searching.
L The handset automatically exits after 1 minute of
inactivity.
TG2420(e).book Page 42 Monday, January 24, 2005 4:42 PM